Abstract:The current density-luminance-voltage characteristics of organic light-emitting devices (OLEDs) with N,N′-Bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine (NPB) of various thicknesses as the hole transport layer have been investigated. It is found that for conventional structures of indium–tin–oxide/NPB/tris(8-hydroxyquinoline) aluminum (Alq3) (60 nm)/LiF (0.5 nm)/Al the optimal hole injection and luminescence efficiencies appear at NPB thicknesses of 5 and 20 nm, respectively. The large difference between the two optimal thicknesses suggests that the effective block of the NPB layer against electrons from across the Alq3/NPB interface is essential for high-efficiency operation of the OLEDs. The electron blocking effect of NPB is further confirmed by the electroluminescence (EL) behavior of devices with the structure of ITO/NPB(5 nm)/Alq3:4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) (30 nm)/NPB/Alq3(60 nm)/LiF(0.5 nm)/Al. The proportion of DCM EL to the whole EL decreases with increasing NPB thickness. This suggests that the NPB layer blocks electron transport to the Alq3:DCM layer. The Förster energy transfer from the 60 nm Alq3 layer to the DCM molecules is ruled out by the EL behavior observed after quenching excitons in the Alq3 layer. The origin of the difference in the optimal N,N′-Bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) thicknesses reported by other two different groups is also discussed.

Organic light-emitting diodes with 2-(4-biphenylyl)-5(4-tert-butyl-phenyl)-1,3,4-oxadiazole layer inserted between hole-injecting and hole-transporting layers

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Organic light-emitting diodes with varying thickness of bathocuproine layer

An Efficient Blue Organic Light Emitting Structure

Narrow Emission from Polyimide Light-Emitting Diodes

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

P-141: High-Efficiency and Long Lifetime Electrophosphorescent Organic Light-Emitting Diodes with Improved Hole-Electron Balance by Using Alternate Multilayer Structures

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Small Molecular Phosphorescent Organic Light-Emitting Diodes Using A Spin-Coated Hole Blocking Layer

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Enhancing the contrast and power efficiency of organic light-emitting diodes using CuPc/TiOPc as an anti-reflection layer

Efficient Nondoped Organic Light-Emitting Diodes with CuI Complex Emitter

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Thin Film Light-Emitting Diodes with Organic/Inorganic Heterostructure

A Mixed Organic-Inorganic Interlayer With Tunable Electrical Properties Enabling Stable and Efficient Perovskite Light-Emitting Diodes

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers