Abstract:A series of 1,8-naphthyridine derivatives is synthesized and their electron-transporting/injecting (ET/EI) properties are investigated via a multilayered electrophosphorescent organic light-emitting device (OLED) using fac-tris(2-phenylpyridine)iridium [Ir(ppy)3] as a green phosphorescent emitter doped into a 4,4-N,N-dicarbazolebiphenyl (CBP) host with 4,4-bis[N-(1-naphthyl)-N-phenylamino]biphenyl (a-NPD) as the hole-transporting layer, and poly(arylene ether sulfone) containing tetraphenylbenzidine (TPDPES) doped with tris(4-bromophenyl)ammonium hexachloroantimonate (TBPAH) as the hole-injecting layer. The turn-on voltage of the device is 2.5 V using 2,7-bis[3-(2-phenyl)-1,8-naphthyridinyl]-9,9-dimethylfluorene (DNPF), lower than that of 3.0 V for the device using a conventional ET material. The maximum current efficiency (CE) and power efficiency (PE) of the DNPF device are much higher than those of a conventional device. With the aid of a hole-blocking (HB) and exciton-blocking layer of bathocuproine (BCP), 13.213.7% of the maximum external quantum efficiency (EQE) and a maximum PE of 50.254.5 lm W1 are obtained using the naphthyridine derivatives; these values are comparable with or even higher than the 13.6% for conventional ET material. The naphthyridine derivatives show high thermal stabilities, glass-transition temperatures much higher than that of aluminum(III) bis(2-methyl-8-quinolinato)-4-phenylphenolate (BAlq), and decomposition temperatures of 510518 degrees C, comparable to or even higher than those of Alq3.

P-141: High-Efficiency and Long Lifetime Electrophosphorescent Organic Light-Emitting Diodes with Improved Hole-Electron Balance by Using Alternate Multilayer Structures

Improving working lifetime and efficiency of phosphor doped organic light-emitting diodes

The Improved Performance of Phosphorescent P-I-n Organic Light Emitting Diodes Via Enhancing Hole Injection and Reducing Triplet-Polaron Annihilation

P‐168: Investigation of High‐Efficiency Electrophosphorescent Organic Light‐emitting Diodes with Double‐Emission Layers

Suppression of Efficiency Roll-off in Highly Efficient Blue Phosphorescent Organic Light-Emitting Devices Using Novel Iridium Phosphors with Good Electron Mobility

Improved Efficiency in Blue Phosphorescent Organic Light‐Emitting Devices Using Host Materials of Lower Triplet Energy Than the Phosphorescent Blue Emitter

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Efficiency Improvement Of Yellow Organic Light-Emitting Devices By Using Mixed Hole Transporting Layer

Improved performances of the organic light-emitting devices by doping in the mixed layer

Enhanced Efficiency and Reduced Roll-off in Nondoped Phosphorescent Organic Light-Emitting Devices with Triplet Multiple Quantum Well Structures

Green Phosphorescent Organic Light-Emitting Diode Based on Interlayer Emitting Layer Blend of Hole- and Electron-Transporting Materials As A Co-Host of the Three Emitting Layers

An Efficient Blue Organic Light Emitting Structure

High-efficiency Blue Organic Light-Emitting Devices Based on Phosphorescent Dopant Material

Study on the Performance of Organic Light-Emitting Diode with N,N'-Bis(3-Methylphenyl)-N,N'-Diphenylbenzidine Doped in Polystyrene As Hole Transporting Layer

Tungsten Oxide Doped N,N-'-Di(Naphthalen-1-Yl)-N,N-'-Diphenyl-Benzidine As Hole Injection Layer for High Performance Organic Light-Emitting Diodes

Very High-Efficiency And Low Voltage Phosphorescent Organic Light-Emitting Diodes Based On A P-I-N Junction

Improved Performance of Electrophosphorescent Organic Light-emitting Diode by Graded Doped Emissive Layer

Obvious Efficiency Enhancement of Organic Light-Emitting Diodes by Parylene-N Buffer Layer

Highly Efficient Electron-Transporting/Injecting And Thermally Stable Naphthyridines For Organic Electrophosphorescent Devices

High-Efficiency White Organic Light-Emitting Devices with A Non-Doped Yellow Phosphorescent Emissive Layer

Tailoring Electronic Structure of Organic Host for High-Performance Phosphorescent Organic Light-Emitting Diodes