Abstract:Silicon has emerged as a highly promising anode material for lithium-ion batteries (LIBs) owing to its high specific capacity and low voltage. However, previous research on silicon-based anodes has not adequately addressed inherent issues, leading to limited commercial applications on a large scale. Therefore, further scientific investigation is necessary to uncover the lithiation/delithiation process in silicon materials and understand the influence of electrode potential and charge state on the kinetic process during charge and discharge. This understanding will be instrumental in gradually enhancing the performance of silicon materials. Herein, amorphous silicon films were prepared for LIB anodes using the magnetron sputtering method. Molecular dynamics simulations were conducted to investigate the microstructure and volumetric changes of the sputtered amorphous silicon anode during the lithiation and delithiation processes. Additionally, electrochemical characterization techniques such as a galvanostatic intermittent titration technique, electrochemical impedance spectroscopy, and galvanostatic charge–discharge test were employed to explore the electrochemical properties of silicon electrodes. Electrochemical analysis techniques, such as the differential capacity method and distribution of relaxation times, were also used to investigate the deterioration mechanisms of the electrochemical and conversion properties of amorphous silicon anodes. Results revealed that the lithium-ion content in Li x Si, determined through the set cutoff voltage during charge/discharge cycling, considerably affected the volume change of the silicon anode and the composition and integrity of the solid electrolyte interface after cycling. The optimum discharge cutoff voltage was found to be 0.08 V for the amorphous silicon electrode, leading to an optimum cycle life with a capacity retention of 87.17% after 100 cycles.

Lithium electrochemistry of SiO2 thin film electrode for lithium-ion batteries

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

A Critical SiOx Layer on Si Porous Structures to Construct Highly-Reversible Anode Materials for Lithium-Ion Batteries.

Heterogeneous Interface-Derived Engineered Electronic Structure of SiO with Enhanced Lithium Storage

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Mechanical Properties and Chemical Reactivity of Li xSiO y Thin Films

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Systematic electrochemical characterizations of Si and SiO anodes for high-capacity Li-Ion batteries

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

A facile and scalable Fe-Cr decorating strategy to boost the lithium storage of SiO anode

Improving Electrochemical Performance of Thick Silicon Film Anodes with Implanted Solid Lithium Source Electrolyte

Systematic Investigation of Prelithiated SiO2 Particles for High-Performance Anodes in Lithium-Ion Battery

Magnetron Sputtering Silicon Thin Film Electrodes for Lithium-Ion Batteries

A Review of Design Strategies in SiO/C Composite Anodes for Rechargeable Lithium-Ion Batteries

Monodisperse and Homogeneous SiOx/C Microspheres: A Promising High-Capacity and Durable Anode Material for Lithium-Ion Batteries

Modifying SiO as a ternary composite anode material((SiO x /G/SnO 2 )@C) for Lithium battery with high Li-ion diffusion and lower volume expansion

Lifetime Optimization of Amorphous Silicon Thin-Film Anodes for Lithium-Ion Batteries

A SiO2@Al as stable and long-cycle anode for lithium-ion batteries

Modified SiO as a high performance anode for Li-ion batteries