Abstract:The F‐doped carbon‐coated Si/SiOx composites are prepared via a simple liquid phase mixing and annealing method. The obtained materials effectively promote the rapid migration of electrons/ions enhance the interfacial compatibility, and finally significantly improve the comprehensive lithium battery performance. Such a preparation method provides an effective approach for the wide application of silicon‐based anodes in advanced high‐performance lithium batteries. To address the significant challenges encountered by silicon‐based anodes in high‐performance lithium‐ion batteries (LIBs), including poor cycling stability, low initial coulombic efficiency (ICE), and insufficient interface compatibility, this work innovatively prepares high‐performance Si/SiOx@F‐C composites via in situ coating fluorine‐doping carbon layer on Si/SiOx surface through high‐temperature pyrolysis. The Si/SiOx@F‐C electrodes exhibit superior LIB performance with a high ICE of 79%, exceeding the 71% and 43% demonstrated by Si/SiOx@C and Si/SiOx, respectively. These electrodes also show excellent rate performance, maintaining a capacity of 603 mAhg−1 even under a high current density of 5000 mAg−1. Notably, the Si/SiOx@F‐C electrode sustains a high reversible capacity of 829 mAh g−1 at 1000 mA g−1 over 1400 cycles, and 588 mAhg−1 at 3000 mAg−1 even over 2400 cycles, capacity retention of up to 82.12%. Comprehensive characterization and analysis of the fluorine‐doped carbon layer reveal its role in enhancing electrical conductivity and preventing structural degradation of the material. The abundant fluorine in the coating layer significantly increases the LiF concentration in the solid electrolyte interface (SEI) film, improving interfacial compatibility and overall lithium storage performance. This method is both straightforward and effective, providing a promising blueprint for the broader application of Si‐based anodes in advanced lithium batteries.

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Vertically Fluorinated Graphene Encapsulated SiOx Anode for Enhanced Li+ Transport and Interfacial Stability in High-Energy-Density Lithium Batteries

Heterogeneous Interface-Derived Engineered Electronic Structure of SiO with Enhanced Lithium Storage

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

Facile Fabrication of Oxide Layer for Si Anode with Enhanced Lithium Storage Performances Via Plasma Oxidation

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

Weakly Solvated Electrolyte Enables the Robust Solid Electrolyte Interface on Siox Anodes for Lithium-Ion Battery

In Situ Artificial Hybrid SEI Layer Enabled High‐Performance Prelithiated SiO x Anode for Lithium‐Ion Batteries

Constructing a Robust Solid–Electrolyte Interphase Layer Via Chemical Prelithiation for High‐Performance SiOx Anode

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Preset Lithium Source Electrolyte Boosts SiO Anode Performance for Lithium-Ion Batteries

A Facile in Situ Synthesis of Nanocrystal-Fesi-embedded Si/SiO X Anode for Long-Cycle-life Lithium Ion Batteries

Fluorine‐Doping Carbon‐Modified Si/SiOx to Effectively Achieve High‐Performance Anode

Scalable synthesis of high-performance anode material SiOx/C for lithium-ion batteries by employing the Rochow reaction process

Fundamental Understanding of the Low Initial Coulombic Efficiency in SiOx Anode for Lithium-Ion Batteries: Mechanisms and Solutions