Abstract:Silicon monoxide (SiOx, x ∼ 1) has emerged as a highly promising candidate for high-energy-density lithium-ion batteries due to its high specific capacity and suitable working potential. Nevertheless, the formation of a large quantity of irreversible products, such as Li2O and lithium silicates, during the initial lithiation process results in a low initial coulombic efficiency (ICE) of SiOx, which is a significant impediment to its commercial application. To overcome this limitation, two lithium aromatic complexes, namely, lithium-naphthalene-2-methyl-tetrahydrofuran (N-LAC) and lithium-biphenyl-2-methyl-tetrahydrofuran (B-LAC), with a low redox potential are used to pre-lithiate SiOx anodes. The differences in lithiation kinetics and efficacy of the two LAC solutions are identified and assessed by scrutinizing the pre-lithiation process of SiOx materials. It is revealed that both pre-lithiation agents produce solid electrolyte interphase (SEI) films on the material surface enriched with substances such as LiF, Li2CO3, and ROCO2Li, but the LiF content in the SEI of the N-LAC pre-lithiated electrode is significantly higher. Furthermore, the surface roughness of the N-LAC pre-lithiated electrode is lower, and the horizontal distribution of mechanical properties and surface potential tend to be more homogeneous, even during cycling, at approximately the same degree of lithiation. The results indicate that the N-LAC solutions not only improve the ICE of the SiOx material but also optimize the interfacial and structural stability of the SiOx electrode. When the pre-lithiated SiOx anode is paired with lithium-rich layered oxide cathode materials, the energy density and ICE are significantly improved compared to the cell using pristine SiOx anode.

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Li+ Solvation Structure Modification in Chemical Prelithiation Enabling Spatially Homogeneous Sei Toward High Performance Siox Anode

Chemical Pre-lithiation of SiO x Anodes with a Weakly Solvating Solution of Polycyclic Aromatic Hydrocarbons for Lithium-Ion Batteries

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

Boosting the initial coulombic efficiency for SiO anodes through component controlling and microcrystalline size limiting regulated by carbon layer

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

Mg 2 SiO 4 /Si-Coated Disproportionated SiO Composite Anodes with High Initial Coulombic Efficiency for Lithium Ion Batteries

Heterogeneous Interface-Derived Engineered Electronic Structure of SiO with Enhanced Lithium Storage

Pre-Lithiating SiO Anodes for Lithium-Ion Batteries by a Simple, Effective, and Controllable Strategy Using Stabilized Lithium Metal Powder

Mg‐doped, carbon‐coated, and prelithiated SiOx as anode materials with improved initial Coulombic efficiency for lithium‐ion batteries

High Initial Coulombic Efficiency of SiO Enabled by Controlling SiO2 Matrix Crystallization

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

In Situ Artificial Hybrid SEI Layer Enabled High‐Performance Prelithiated SiO x Anode for Lithium‐Ion Batteries

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Potassium Ions Regulated the Disproportionation of Silicon Monoxide Boosting Its Performance for Lithium-Ion Battery Anodes

Electrochemical performance of a high-performance SiO composite anode material for Li-ion battery enhanced by piezoelectric effect

Constructing a Robust Solid–Electrolyte Interphase Layer Via Chemical Prelithiation for High‐Performance SiOx Anode

Preset Lithium Source Electrolyte Boosts SiO Anode Performance for Lithium-Ion Batteries