Abstract:Silica (SiO2) is considered as a promising candidate anode material for next-generation lithium-ion batteries (LIBs) owing to its low cost, abundant reserve on Earth, and relatively high theoretical specific capacity. However, the development of SiO2-based anode materials has been impeded by their poor electrical conductivity and sluggish charge-transfer kinetics. Herein, porous SiO2/tin (SiO2@Sn) composites with tunable SiO2 to Sn molar ratios are fabricated using a scalable, simple, and low-cost ball-milling and low-temperature thermal-melting combined method. It is found that the Sn phase can significantly improve the diffusion and migration kinetics of Li in the composites, whereas the SiO2 to Sn molar ratio plays a key role in the mechanical integrity and subsequent cycling behaviors of the composite electrodes. By optimizing the molar ratio of SiO2/Sn to 10:1, the synergistic effect of Li storage between SiO2 and Sn can lead to the simultaneous achievement of improved Li kinetics and ensured mechanical integrity, contributing to the excellent electrochemical performance of the composite with a large reversible capacity of 613 mAh g–1 at 100 mA g–1, a remarkable rate capability of 450 mAh g–1 retained at 1000 mA g–1, and long-term cycling durability with ∼95% capacity retention over 200 cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00023?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00023</a>.SEM image; CV curves; XPS spectra; cycling and rate performance of different samples; and description of chemo-mechanical simulation (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_001.pdf">PDF</a>)Chemo-mechanical simulation of Li and effective stress evolutions in the blocks and on the cross sections of SiO2@Sn-10 and SiO2@Sn-1 electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00023/suppl_file/ae1c00023_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Modifying SiO as a ternary composite anode material((SiO x /G/SnO 2 )@C) for Lithium battery with high Li-ion diffusion and lower volume expansion

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

A Hybrid Structure to Improve Electrochemical Performance of SiO Anode Materials in Lithium-Ion Battery

Disproportionated SiOx/C composite anode materials for lithium-ion batteries

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Engineering Si-Based Anode Materials with Homogeneous Distribution of SiO x and Carbon for Lithium-Ion Batteries

Spent graphite as promising carbon matrix for high performance SiO/C anode material of Li-ion battery

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

Synergistic Lithium Storage in Silica–Tin Composites Enables a Cycle-Stable and High-Capacity Anode for Lithium-Ion Batteries

SiO x @Si-graphite microspheres for high-stable anode of Lithium-ion batteries

Enhanced Electrochemical Performance Promoted by Tin in Silica Anode Materials for Stable and High-Capacity Lithium-Ion Batteries

SiO anode with long-term cycling ability enhanced by a SiC transition layer based on polymethysilane in LIBs

Compact Si/C Anodes Fabricated by Simultaneously Regulating the Size and Oxidation Degree of Si for Li-Ion Batteries

SiO<sub>x</sub> microparticles embedded into 3D wrinkled N, S co-doped multilayer graphene sheets as a high-performance anode for long-life full lithium-ion batteries

Confining micron silicon suboxide (μ-SiOx) into N-doped carbon matrix modified by Sn nanoparticles as the stabilized anode material for fast charging lithium-ion batteries

Enhanced stability and kinetic performance of sandwich Si anode constructed by carbon nanotube and silicon carbide for lithium-ion battery

Si@C@MoO 2 spherical superstructure to optimize the volume effect and fast diffusion kinetics for lithium storage

Improving the lithium storage performance of micro-sized SiO particles by uniform carbon interphase encapsulation and suitable SiO2 buffer component

SiOx@Si-graphite microspheres for high-stable anode of lithium-ion batteries

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries