Abstract:Nanostructured silicon anodes have shown extraordinary lithium storage properties for lithium-ion batteries (LIBs) but are usually achieved at low areal loadings (< 1.5 mg·cm −2 ) with low areal capacity. Sustaining sound electrochemical performance at high loading requires proportionally higher ion/electron currents and robust structural stability in the thicker electrode. Herein, we report a three-dimensional (3D) printed silicon-graphene-carbon nanotube (3D-Si/G/C) electrode for simultaneously achieving ultrahigh areal/gravimetric capacities at high mass loading. The periodically arranged vertical channels and hierarchically porous filaments facilitate sufficient electrolyte infiltration and rapid ion diffusion, and the carbonaceous network provides excellent electron transport properties and mechanical integrity, thus endowing the printed 3D-Si/G/C electrode with fast electrochemical reaction kinetics and reversibility at high mass loading. Consequently, the 3D-Si/G/C with high areal mass loading of 12.9 mg·cm −2 exhibits excellent areal capacity of 12.8 mAh·cm −2 and specific capacity of 1007 mAh·g −1 , respectively. In-situ optical microscope and ex-situ scanning electron microscope (SEM) confirm that the hierarchically porous filaments with interconnected carbon skeletons effectively suppress the volume change of silicon and maintain stable micro-lattice architecture. A 3D printed 3D-Si/G/C-1∥3D-LiFePO 4 /G full cell holds excellent cyclic stability (capacity retention rate of 78% after 50 cycles) with an initial Coulombic efficiency (ICE) of 96%. This work validates the feasibility of 3D printing on constructing high mass loading silicon anode for practical high energy-density LIBs.

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

SiO x @Si-graphite microspheres for high-stable anode of Lithium-ion batteries

SiOx@Si-graphite microspheres for high-stable anode of lithium-ion batteries

SiO<sub>x</sub> microparticles embedded into 3D wrinkled N, S co-doped multilayer graphene sheets as a high-performance anode for long-life full lithium-ion batteries

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

Lithium/Boron Co-doped Micrometer SiOx as Promising Anode Materials for High-Energy-Density Li-Ion Batteries.

Carbon-Coated Si Nanosheets as Anode Materials for High-Performance Lithium-Ion Batteries

Spent graphite as promising carbon matrix for high performance SiO/C anode material of Li-ion battery

Molten Salt Derived Graphene‐Like Carbon Nanosheets Wrapped SiO x /Carbon Submicrospheres with Enhanced Lithium Storage †

Carbon and Li3BO3 co‐modified SiO x as anode for high‐performance lithium‐ion batteries

Green Design of Si/SiO<sub>2</sub>/C Composites as High-Performance Anodes for Lithium-Ion Batteries

Sub-nanometer structured silicon-carbon composite nanolayers armoring on graphite for fast-charging and high-energy-density lithium-ion batteries

Robust Ultrafine-graphite-sheet/Si@Carbon Microsphere with Double Protective Layers as High-Performance Lithium-Ion Battery Anode

Long-cycle and High-rate Si/SiOx/Nitrogen-doped Carbon Composite as an Anode Material for Lithium-ion Batteries

An interconnected and scalable hollow Si-C nanospheres/graphite composite for high-performance lithium-ion batteries

Disproportionated SiOx/C composite anode materials for lithium-ion batteries

Rational Design and Performance of Ansode Materials Based on Si/SiO<i><sub>x</sub></i>/C Particles Anchored on Graphene Sheets

3D printed silicon-based micro-lattices with ultrahigh areal/gravimetric capacities and robust structural stability for lithium-ion batteries

Simple Designed Micro–Nano Si–Graphite Hybrids for Lithium Storage