Abstract:The high concentration of respirable dust pollution created during coal mining has long been known to be harmful to employee health. A water absorbing atomization device has certain advantages when spray trapping particle sizes of PM2.5–10. To further improve the PM0–2.5 trapping efficiency, supersonic coaxial pneumatic atomization dust removal technology has been developed. The effects of fog droplet characteristics on the instantaneous diffusion of dust were studied by numerical simulation and macro- and microexperiments for the first time, and the coupling characteristics of fog droplets and dust fields were obtained. The results show that with increasing aerodynamic pressure, the supersonic range extends along the axis toward the nozzle outlet, and the average velocity in the tube increases. Under different pressures, the droplet particle size in the supersonic coaxial atomizing nozzle is <6 μm and decreases with increasing aerodynamic pressure. When a droplet effuses from the nozzle, the transonic distribution of the flow field causes the droplet velocity to increase first and then decrease under the drag force. The droplet field characteristic distribution of supersonic coaxial atomization is determined by droplet evaporation, condensation, and migration. Under the same pressure, with increasing spray distance, the distribution of the droplet particle size increases in a stepwise manner, and the droplet velocity decreases according to an exponential function so that the droplet field produces a high-speed fine fog area. The range of droplets with higher velocities and smaller particle sizes is mainly influenced by migration and increases with increasing pressure. The coupling effect droplet field and dust field can be characterized by the instantaneous dispersion of dust and are determined by the distribution characteristics of the fog droplet field. The large range of high-speed fine fog produced by supersonic coaxial atomization technology easily traps respirable dust, and the classification efficiency of PM0–2.5 reaches 90%. In this study, a new dynamic microfog dust trapping technique was proposed, and a new method of instantaneous sampling combined with a microscopic dispersion test was adopted to characterize the temporal and spatial distributions of dust fields affected by fog droplet fields, reveal the generation of dynamic microfog and the mechanism of dust trapping, enrich the theory of fine dust trapping, and provide technical support for the safe production and utilization of coal.

Design of Anti-explosion Sufur-dust Multi Cyclone

Micro Gas Cyclone Design and Performance Evaluation to Collect Dust Particles

Performance Evaluation of a New Micro Gas Cyclone Using Simulation and Experimental Studies to Capture Indoor Fine Particles

Dust Removal Principle and Numerical Simulation of New Type Cyclone-bag Combined Dust Collector

Structural Design and Numerical Simulation of Inner Flow Field for Cyclone Dust Collector

Cyclone dust collector with double ash discharge structure

Static and high -efficient dust removal defogging integrated device of inertia coupling

High-efficiency long-life cyclone dust collector

Design of Attrition Resistant Cyclone Dust Collector

Wet-type whirlwind dust collector

Electrostatic dust removing device for high-temperature coal gas

Wide temperature high leakproofness dust collector of formula of controlling oneself

Investigation on the design of atomization device for coal dust suppression in underground roadways

Supersonic coaxial aerodynamic atomization dust removal technology

Self-holding wide-temperature high-sealing performance dust removal device and process

Analysis of Dust Reduction Characteristics of Multistage Tandem Dust Removal System

Volute cyclone dust collector

Experimental and numerical evaluation of the dust suppression efficiency of an innovative vortex pneumatic fog screen dust control device

Analysis and Optimization of Spray Structure for Mine Wet Dust Remover

Temperature / many intensive compound electrostatic dust collection system of wet regulation and control

Three-stage cyclone separation dust collector