Abstract:This paper conducted a comprehensive investigation into the role of polymers in cement-based materials. First, the modification mechanism of polymers on cement-based materials based on physical and chemical effects are analyzed. The polymers are adsorbed on the surface of cement particles and cement hydration products through electrostatic attraction or hydrogen bonding, and filled in the pores or interfacial areas, and then transformed into a three-dimensional interpenetrating network structure, so as to densify the matrix materials. Then, the effects of polymers on the cement hydration reaction were introduced. It is mainly attributed to the adsorption behavior between polymer particles, and polymer films with cement causes them to cover the surfaces of cement particles and hydration products, which to some extent restricts the effective diffusion of various ions, such as Ca 2+ , AlO 2 − , SiO 4 2− , SO 4 2− , etc., as well as water in the system. And the complexation of functional groups in the polymer with Ca 2+ hinders the nucleation and precipitation of calcium-containing hydration products, which in turn delays the hydration reaction process. In terms of strength, as it can be due to the agglomeration of polymer chains, increased porosity arised from generated CO 2 gas and entrained air during preparation, the improvement effect of the polymers on cement-based material's compressive strength is not apparent or it shows a decreasing trend. As the role of "microfibers" and "bridge", many filamentous or network structures composed of flexible polymer membranes dramatically improve the flexural strength and toughness, and also enhance the bonding property of the matrix material. It is expected that the polymers containing designed specific structures according to target property will be applied in cement-based materials, and the universal guidelines and regulations will be provide for expanded application of polymer modified cement-based materials (PMCBMs) in the construction industry.

Advance on Fly Ash-Based Mineral Polymer Material

Preparation and Research of Fly Ash Based Mineral Polymer

Study on Preparation of Mineral Polymer from Fly Ash

A Bibliometric Analysis of Research Progress and Trends on Fly Ash-Based Geopolymer

Recent trends in mechanochemical processing of fly ash aluminosilicate materials (geopolymers): advancement, challenges, and opportunities

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Study on Fabrication and Microstructures of Fly Ash Based Geopolymeric Cements

MINERAL POLYMER: CURRENT DEVELOPMENTS AND PROSPECTS

Study on the Geopolymer Based on Fly Ash and Slag

Advanced Coal Fly Ash Modification by Using Corrosive Microorganisms As Alternative Filler-Reinforcing Fluororubbers

Research on Improving Cementitious Material Properties by Adding FineFly Ash

Synthesis and Performance Evaluation of Nano-Calcium Carbonate-Modified Geopolymers Incorporating Fly Ash and Manganese Slag: A Comprehensive Investigative Study

A Comprehensive Review on Fly Ash-Based Geopolymer

Mechanical activation of fly ash:effect on performance and mechanism of resulting geopolymer

Factors affecting the property of open-cell fly ash-based porous geopolymer via replica method

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Mechanical Properties of Short Fiber-Reinforced Geopolymers Made by Casted and 3D Printing Methods: A Comparative Study

A review on the modification mechanism of polymer on cement-based materials

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Study on Preparation of Quartz-Based Mineral Polymer by Autoclaved Process