Abstract:An enhanced use of fly ash in cement composites can decrease energy consumption, reduce related CO2 emissions, and conserve natural resources. However, low activity fly ash reduces the degree of early-age hydration and early strength of cement composites. This paper presents a facile processing method to increase the reactivity of fly ash and improve the early strength of low-carbon composites. Fly ash is mixed with TiO2 nanoparticles through ball milling, and the resulting roughened particles are used as supplementary cementitious materials (20 wt%) in a cement matrix. The TiO2 nanoparticles coated on the surface of fly ash improve the interfacial interlocking between fly ash and cement, and increase the early-age pozzolanic activity of fly ash. At a nano-TiO2 composition of 1 wt% of the binder materials, the early flexural strength and compressive strength of the paste exhibit a dramatic increase (of 37.74% and 39.11%, respectively) over those of a paste without nano-TiO2. A hydration heat evaluation of the fly ash-cement pastes conducted by an isothermal calorimeter indicates that the TiO2 nanoparticles coated on the surface of fly ash increase the hydration rate and hydration extent of the early hydration reaction of fly ash-cement paste. The thermogravimetric analysis results indicate that the TiO2 nanoparticles coated on the surface of fly ash promote the reaction of fly ash with calcium hydroxide (hydration products). This study illustrates the effectiveness of the interfacial design by this facile ball-milling process in overcoming the low reactivity of class-F fly ash and improving the early strength of low-carbon composites. More importantly, the proposed strategy can be conveniently extended to other waste materials, which could potentially improve the waste recycling efficiency. (C) 2020 Elsevier Ltd. All rights reserved.

Research on Improving Cementitious Material Properties by Adding FineFly Ash

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Improvement of Surface Cementitious Properties of Low Activity Fly Ash

Influence of Fly Ash on the Properties of Cement-Based Materials

Effect of Fly Ash with Different Particle Size Distributions on the Properties and Microstructure of Concrete

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Influence of Ultrafine Fly Ash Composite on the Fluidity and Compressive Strength of Concrete

EXPERIMENTAL STUDY ON IMPROVEMENT OF ORGANIC SOIL WITH CEMENT AND FLY-ASH

Interfacial Design of Nano-Tio2 Modified Fly Ash-Cement Based Low Carbon Composites

Effects of ultrafine fly ash on the properties of high-strength concrete

TESTING RESEARCH OF PERFORMANCE OF CONCRETE ADMIXING ACTIVATED WET FLY- ASH

Research on Fly- Ash Poor- Clinker Cement

lnfluence of steel slag - superfine fly ash composite mineral admixture on the properties of concrete

The Effect of Fly Ash Qualify on the Properties of Concrete

Study on Strength, Shrinkage and Creep of Concrete Containing Ultrafine Fly Ash Composites

Effect of Fly Ash Content on Mechanical Properties of Cement-Fly Ash Stabilized Crushed Stones

The Ratio Optimization and Strength Mechanism of Composite Cementitious Material with Low-Quality Fly Ash

Cementitious binder derived with fluorogypsum and low quality of fly ash

Effect of Fly Ash Additive on Concrete Properties

Analysis of mechanism on water-reducing effect of fine ground slag, high-calcium fly ash, and low-calcium fly ash

The effect of fly ash on the mechanical properties of cinder lightweight aggregate concrete