Abstract:With the rapid pace of socioeconomic progress, there has been a continuous rise in the generation of municipal solid waste incineration (MSWI) fly ash. Enhancing the efficiency of MSWI fly ash utilization, minimizing expenses, and developing more cost-effective and environmentally sustainable cementitious materials represent critical scientific challenges that warrant immediate attention. The research commenced with the preliminary treatment of MSWI fly ash using a blend of chemical activators and a water rinsing method. Following this, quicklime and coal fly ash were incorporated to formulate a geopolymer derived from MSWI, aimed at stabilizing the MSWI fly ash. Throughout this investigation, a selection of five chemical activators—calcium hydroxide, sodium hydroxide, sodium silicate, dilute sulfuric acid, and citric acid—was employed in conjunction with a water-washing procedure to condition the MSWI fly ash. Three single factor experiments denoted A, B, and C, were designed, and the corresponding geopolymer samples were prepared. In this research, the analysis focused on the solidified MSWI fly ash-based geopolymer samples, examining their physical and chemical characteristics, compressive strength, levels of heavy metal release, and the structure at a microscopic level. The findings revealed that the B3 series exhibited the most substantial 28-day compressive strength, reaching 1.692 MPa. Concurrently, the concentrations of leached heavy metals, including zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), cadmium (Cd), and nickel (Ni), were all beneath the regulatory thresholds stipulated by the GB16889 and GB18598 criteria, signifying a notably effective solidification outcome. During the geopolymerization process, gel phases such as calcium aluminosilicate hydrate (C-A-S-H) and calcium silicate hydrate (C-S-H) are formed within the geopolymer matrix. This leads to the formation of a compact and cohesive cementitious material, which showcases superior mechanical strength and a robust capacity for heavy metal sequestration. This research contributes to the safe management of MSWI fly ash by not only facilitating its non-hazardous disposal but also enabling the efficient containment and elimination of heavy metals, chloride ions, and elemental aluminum.

Mechanical activation of fly ash:effect on performance and mechanism of resulting geopolymer

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Influence of Activators on Mechanical Properties of Modified Fly Ash Based Geopolymer Mortars

Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties

Mechanical activation of coal gasification slag for one-part geopolymer synthesis by alkali fusion and component additive method

Activation Mechanism of Coal Gangue and Its Impact on the Properties of Geopolymers: A Review

Mechanism of fly ash's effects during hydration process of composite binder

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Influence of new organic alkali activators on microstructure and strength of fly ash geopolymer

A factorial experimental analysis of using wood fly ash as an alkaline activator along with coal fly ash for production of geopolymer-cementitious hybrids

Realization of high-percentage addition of fly ash in the materials for the preparation of geopolymer derived from acid-activated metakaolin

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Study on the relation between macro-mechanical properties and micro-structure of geopolymers with different activator modulus

Microstructure Analysis and Effects of Single and Mixed Activators on Setting Time and Strength of Coal Gangue-Based Geopolymers

Enhanced geopolymerization of MSWI fly ash through combined activator pretreatment: A sustainable approach to heavy metal encapsulation and resource recovery