Abstract:Fly ash from coal represents the foremost waste product of fossil fuel combustion. These waste materials are most widely utilised in the cement and concrete industries, but the extent of their use is insufficient. This study investigated the physical, mineralogical, and morphological characteristics of non-treated and mechanically activated fly ash. The possibility of enhancing the hydration rate of the fresh cement paste by replacing part of the cement with non-treated and mechanically activated fly ash, and the hardened cement paste's structure and early compressive strength performance, were evaluated. At the first stage of the study, up to 20% mass of cement was replaced by untreated and mechanically activated fly ash to understand the impact of the mechanical activation on the hydration course; rheological properties, such as spread and setting time; hydration products; mechanical properties; and microstructure of fresh and hardened cement paste. The results show that a higher amount of untreated fly ash significantly prolongs the cement hydration process, decreases hydration temperature, deteriorates the structure and decreases compressive strength. Mechanical activation caused the breakdown of large porous aggregates in fly ash, enhancing the physical properties and reactivity of fly ash particles. Due to increased fineness and pozzolanic activity by up to 15%, mechanically activated fly ash shortens the time of maximum exothermic temperature and increases this temperature by up to 16%. Due to nanosized particles and higher pozzolanic activity, mechanically activated fly ash facilitates a denser structure, improves the contact zone between the cement matrix, and increases compressive strength up to 30%.

Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature

Mechanical activation of fly ash:effect on performance and mechanism of resulting geopolymer

Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Influence of Activators on Mechanical Properties of Modified Fly Ash Based Geopolymer Mortars

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Synthesis of Geopolymers Incorporating Mechanically Activated Fly Ash Blended with Alkaline Earth Carbonates: A Comparative Analysis

The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties

Influence of new organic alkali activators on microstructure and strength of fly ash geopolymer

Fresh and Hardened Properties of One-Part Fly Ash-Based Geopolymer Binders Cured at Room Temperature: Effect of Slag and Alkali Activators

The Effects of Phosphate Compounds on the Microstructure and Mechanical Properties of Fly Ash Geopolymer Mortars

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

XRD and TG-DTA Study of New Alkali Activated Materials Based on Fly Ash with Sand and Glass Powder

Influence of the PVA Fibers and SiO2 NPs on the Structural Properties of Fly Ash Based Sustainable Geopolymer

Effects of Fly Ash Inclusion and Alkali Activation on Physical, Mechanical, and Chemical Properties of Clay

Effect of Waste Glass Powder and Bamboo Fiber on the Physico-Mechanical Properties and High-Temperature Behavior of a Fly Ash-Based Geopolymer

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer