Abstract:Cement production emits a large amount of CO 2 into the atmosphere and consumes significant mineral resources, necessitating urgent green transformation in this traditional industry. To address carbon emissions in the building materials sector and effectively utilize industrial solid waste, this study presents the preparation of geopolymer mortar using a ternary mixture of fly ash (FA), slag (GGBS) and red mud (RM), making full use of the advantages of each component to optimize the mix proportion. The mix proportions are determined using the simplex-centroid experimental design method, with NaOH concentration (8 M, 10 M, 12 M) as the independent variable, aiming to meet multi-objective performance requirements including fluidity, setting time, flexural strength, and compressive strength. The microstructure and composition of hydration products are examined through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Finally, the optimal mix proportion range is proposed. Results indicate that: (1) When the concentration of NaOH increases, the setting time is shortened, and the mechanical properties first increase and then decrease. The optimal alkali concentration is 10 mol/L. (2) RM and FA exhibit similar effects on mechanical properties, suggesting RM can replace FA in geopolymer material preparation. Besides, RM significantly reduces fluidity. (3) GGBS enhances mechanical properties and shortens setting time. The increase of GGBS content provides more CaO for the matrix and generates more compact C-S-H gel, and thus, the flexural strength and compressive strength of the geopolymer mortar are improved. When GGBS blending amount is 50 % and NaOH is 10 M, the flexural strength and compressive strength of mortar can reach 15.66 MPa and 69.06 MPa, respectively. (4) The simplex-centroid experimental design method provides a mix proportion design method that can meet the requirements of multiple properties at the same time.

Study on Preparation of Quartz-Based Mineral Polymer by Autoclaved Process

Preparation and Research of Fly Ash Based Mineral Polymer

Preparation of High-strength Mineral Polymer Based on Flyash:An Experimental Study

Study on Preparation of Mineral Polymer from Fly Ash

Research on Resource Utilization of Dyeing Sludge with High Calcium Fly Ash

Mechanical Properties and Coagulation Characteristics of Flue Gas Desulfurization Gypsum-Based Polymer Materials

Advance on Fly Ash-Based Mineral Polymer Material

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Preparation and Characterization of Functional Geopolymer

Study on the Geopolymer Based on Fly Ash and Slag

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Preparation of Lightweight Geopolymer from Inflated Pearlite:an Experimental Study

Preparation of Fly Ash-based Lightweight Loadbearing Wall Materials: an Experimental Study

Mechanism of Polymerization During the Solidification of Flyash-based Geopolymers

A sludge and modified rice husk ash-based geopolymer: synthesis and characterization analysis

Geopolymer bricks prepared by MSWI fly ash and other solid wastes: Moulding pressure and curing method optimisation

Preparation and performance optimization of fly ash- slag- red mud based geopolymer mortar: Simplex-centroid experimental design method

Multicomponent Low Initial Molar Ratio of SiO2/Al2O3 Geopolymer Mortars: Pilot Research

Synthesis and Performance Evaluation of Nano-Calcium Carbonate-Modified Geopolymers Incorporating Fly Ash and Manganese Slag: A Comprehensive Investigative Study

Experimental Investigation on the Influencing Factors of Preparing Porous Fly Ash-Based Geopolymer for Insulation Material