Abstract:The application of diaphragm compressors is severely limited by the low reliability and short life of diaphragms. The cavity profile has considerable influence on a diaphragm's stress level and therefore on its fatigue life. This experimental and theoretical analysis of the traditional cavity profile (as defined by a single-parameter generatrix) indicated that the short life of diaphragms may be caused by the superposition of peak radial stress and additional stress due to the discharge holes in the central region that occur when the diaphragm clings to the cavity surface. Therefore, two new kinds of cavity profiles are proposed to decrease the diaphragm's radial and total stress. The new cavity profiles based on different generatrices were designed in an attempt to reduce the peak radial stress in the central region. These cavities were manufactured to experimentally validate the designs. Experiments were carried out under various design conditions to investigate the radial stress distribution in the diaphragms. The reductions of radial stress on the diaphragms in the new cavities were compared with stress levels found in the traditional design. Although their cavity volumes and radii were all the same, the radial stress levels on diaphragms in the cavities designed by the new generatrices were less than those found in the traditionally designed cavity. The greatest decline in radial stress on the diaphragms in the cavities based on new generatrices was 13.8%. With the additional stress taken into account, the decline in radial stress in the diaphragm's central region reached as high as 19.6%.

FEA of Diaphragm in Diaphragm Compressor Based on ABAQUS

Mechanical Deformation Analysis of Diaphragm Compressor Metal Diaphragm

Analysis and Study on the Diaphragm Cavity Profile of Diaphragm Compressors

FEA-Based Failure Analysis of a UHP Chamber for Simulation of Deep Sea Conditions

TO CALCULATE THE STRENGTH OF TURBINE＇S DIAPHRAGM BY USING FINITE ELEMENT METHOD

Design and Validation of New Cavity Profiles for Diaphragm Stress Reduction in a Diaphragm Compressor

Simulation Analysis of Diaphragm Stress of Servo Valve in Diaphragm Compressors

Finite Element Analysis of the Mechanics Characteristics of Diaphragm Spring

Finite element analysis on the mechanical performance of the diaphragm-braced steel members

Finite Element Analysis on the Diaphragm Spring’s Load-Deformation Characteristic of DCT

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Mechanical Analysis for Fracture of Piston Rod of Dw-160/4.5 Reciprocating Compressor

FEM Analysis on the Valve of Linear Compressor

Finite Element Simulation of Stress Field and Fatigue Analysis of Piston in Trans-critical CO2 Compressor

FEM Analysis on the Deformation of Bearing Faces of Rotary Compressor

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Numerical Analysis Of A Composite Diaphragm Microactuator

A Temperature-Dependent Hyperelastic Constitutive Model for Diaphragm

Study on the Stress and Deformation of a Diaphragm Compressor Cylinder Head under Extreme Conditions

Mechanical property and sealing performance analysis of the diaphragm compressor cylinder head for the hydrogen refueling station under the mutation impact load

Study on the diaphragm fracture in a diaphragm compressor for a hydrogen refueling station