Analysis on strength and stiffness of high pressure hydro-forming press with short stroke and fully pre-stressed assembled frame
Zhang Weiwei,Wang Xiaosong,Gao Guilin,Zhang Hongfeng,Yuan Shijian
DOI: https://doi.org/10.13330/j.issn.1000-3940.2015.10.017
2015-01-01
Abstract:The main advantages of short stroke and high pressure hydro-forming press are higher die-closed speed,shorter main cylinder stroke,shorter establishment time of clamping force and higher production efficiency. In order to decrease the pulsation stress amplitude,enhance the fatigue life and ensure high pressure forming precision of hydro-formed parts,a fully pre-stressed assembled frame structure was used in the structural design of short stroke hydro-forming press. By traditional materials mechanics method,the strength and stiffness of the press crown were checked,and the maximum main stress and the maximum deflection were within the allowable range. Furtherly,the stress distribution and deflection of press body,relative transverse displacement of the column and the shape of joint surface between press crown and column were analyzed by the numerical simulation. The result shows that the equivalent stress of press body is less than100 MPa,the maximum deflection of press crown is 0. 184 mm·m- 1,the transverse displacement of column is 0. 49 mm,and the maximum vertical displacement between press crown and column is 0. 02 mm. Both the strength and the stiffness are within the acceptable range.