Abstract:The main goal of this paper is the modeling, numerical simulation, and experimental validation of the anisotropic ductile damage effects on initially anisotropic plastic flow with mixed (isotropic and kinematic) nonlinear hardening under large plastic strains for metal forming processes simulation. A symmetric second-rank damage tensor together with a symmetrized fourth-rank damage-effect tensor is used to describe the anisotropic ductile damage evolution and its effect on the large plastic flow with hardening. Following the concept of effective state variables in the framework of the total energy equivalence assumption, the “Murakami” fourth-rank damage-effect tensor is chosen to describe the anisotropic damage effect on the elastic-plastic behavior including the mixed hardening. The “Lemaitre” ductile anisotropic damage evolution relationships, where the principal directions of the damage rate tensor are governed by those of the plastic strain rate tensor, are used. As difference with the works cited above, the nonlinear mixed isotropic and kinematic hardening is taken into account considering the full and strong damage effects through the effective state variables deduced from the total energy equivalence assumption initially proposed by Saanouni et al. The non-associative plasticity theory is considered, and the “ Hill 1948 ” quadratic (equivalent) stress norm is used to describe the large plastic anisotropic flow accounting for mixed isotropic and kinematic hardening with anisotropic damage effects. The formulation is performed assuming finite plastic strains and small elastic strains through the so-called rotated frame formulation. The obtained model was implemented into ABAQUS/Explicit® FE software thanks to the user’s developed subroutine VUMAT. The numerical aspects related to the time discretization of the fully coupled anisotropic constitutive equations are carefully described. Finally and for the validation purpose, the model is identified using an appropriate experimental data base concerning the grade 316L stainless steel to simulate numerically some metal forming processes.

Implementation of metal ductile damage criteria in Abaqus FEA

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Modeling of the ductile damage – Application for bar shearing

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Ductile damage model for metal forming simulations including refined description of void nucleation

A new numerical approach for determination of the Lemaitre’s ductile damage parameter in bulk metal forming processes

Experimental-numerical analysis of ductile damage modeling of aluminum alloy using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy system (ANFIS)

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

A Finite Element Implementation of a Ductile Damage Model for Small Strains

A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading

Ductile damage model calibration for high-strength structural steels

A simple implementation of localizing gradient damage model in Abaqus

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Phase field modeling of ductile fracture with isotropic hardening and radius return method