Abstract:As a means of non-contact measurement of blade vibrations, blade tip timing (BTT) has good application prospects for blade design verification and health monitoring. In BTT, the sensor arrangement directly determines the effectiveness of the extracted signal and ultimately affects the quality of the identified vibration parameters. In previous research on optimizing sensor arrangements, the position of each sensor is often selected from among multiple uniformly distributed virtual positions, which limits the optimization space. Moreover, to verify the performance of a sensor arrangement, a highprecision experimental calibration platform is required. However, it is often difficult for the precision to meet the requirements for a benchmark due to an inability to measure the actual blade vibrations. This paper optimized the sensor arrangement by simultaneously considering the mutual coherence and the approximate distance between sensing matrices for an equiangular tight frame in arbitrary-angle compressive sensing method. To avoid the uncertainty in blade displacement conversion in traditional calibration, such as with strain gauges, a laser displacement sensor connected to a slip ring was used to measure directly the displacement of the blade due to vibration. Besides, a macro-fiber composite was used to apply an excitation with a precise frequency to the blade at different speeds to make the blade vibrate synchronously or asynchronously. Then the performance of sensor arrangements optimized by the proposed method as well as other methods, such as mutual coherence, were verified on the self-developed BTT experimental calibration platform. The experimental results show that the signals identified with the optimized sensor arrangements are in good agreement with measurements made by the laser displacement sensor. The amplitude accuracy was more than 76.5% and 91.3% for synchronous and asynchronous vibrations, respectively. Moreover, the identification results were stable after data from 1 or 2 random sensors were removed. This shows the method has good reconstruction accuracy and sensor redundancy.

Measurements of radiation vibrations of turbomachine blades using an optical-fiber displacement-sensing system

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Key technology study on radial vibration detection system of high-speed rotating machinery

NON-CONTACT MEASUREMENT TECHNIQUE FOR DYNAMIC RADIAL DEFORMATION OF EXPLOSION CONTAINMENT VESSELS

Torsional vibration measurements on rotating shaft system using laser doppler vibrometer

Research on Tip Clearance Measurement Technology of Aero-engine Blade Based on Optical Fiber Sensing System

Structural Health Monitoring of Wind Turbine Blade Using Fiber Bragg Grating Sensors and Fiber Optic Rotary Joint

Noncontact Intelligent Vibrometer Based on Laser Triangulation

An Improved Multiple Discrete Time System for Operational Modal Analysis of a Slanted Rotational Blade under Natural Excitation Via a Long-range Tracking Continuously Scanning Laser Doppler Vibrometer System

Fiber sensor used in detecting radial vibration of high rotating speed shaft

Micro-vibration measuring technology based on heterodyne interference

Multi-point laser coherent detection system and its application on vibration measurement

Non-Contact High-Frequency Vibration Measurement Using Blade Tip Vibration Acceleration

Vibration-Displacement Measurement Employing Phase Tracking Technique with an Optical Fiber Michelson Interferometer

An Optoelectronic System For The In-Flight Measurement Of Helicopter Rotor Blades Motions And Strains

Complete Operating Deflection Shapes of an Excited Workpiece in Thermal Environments Via an Improved Continuously Scanning Laser Doppler Vibrometer with a Two-Dimension Scan Scheme

Vibration Measurement Using Laser Triangulation for Applications in Wind Turbine Blades

Detection Of Gas Turbine Dynamic Gap With Total Optical Fiber System

An Optic-Fiber Interferometer for the Dynamic Characterization of Microstructures.

An optical fiber bundle sensor for tip clearance and tip timing measurements in a turbine rig

Experimental Study on the Optimization of the Sensor Arrangement for Blade Tip Timing Measurement