Abstract:To find an effective correlation between the preparation process and the application performance of symmetric supercapacitors, the relationship between the structural characteristics of biomass porous carbon and the electrochemical performances of supercapacitors was studied. Based on a response surface experimental design, the pore structure of biochar produced by the microwave pyrolysis of sargassum was adjusted through the collaborative optimization of key parameters, and graded sargassum porous carbon (SPC) with different pore characteristics was successfully prepared. Three representative samples, SPC−1, SPC−2, and SPC−3, were selected by systematically exploring the effects of the specific surface area (SSA), pore volume (Vtotal), and pore size distribution on the electrochemical performances. The SSA and V total values of SPC−1 were 1500.50 m 2 g −1 and 1.0513 cm 3 g −1 , respectively. The large number of micropores provided space for electronic storage, allowing it to have an excellent electronic storage capacity. The SSA of SPC−2 was 2019.90 m 2 g −1 , and Vtotal was 1.2241 cm 3 g −1 . The rich micropores resulted in a good charge–discharge rate. The SSA of SPC−3 was as high as 2103.20 m 2 g −1 , and Vtotal was 1.4756 cm 3 g −1 . The micron−level mesopores between the SPC−3 carbon skeletons acted as ion buffer reservoirs to shorten the ion diffusion distance and produce excellent rate performances. Subsequently, the morphology and surface properties of porous carbon samples were characterized. The study revealed that hierarchical porous carbon materials with excellent properties must achieve a balance of the microstructure and surface properties and their influence on the electrochemistry. A higher degree of graphitization could bring about a high pore regularity, thereby optimizing the ion transport kinetics. Heteroatoms could increase redox active surface sites and provide additional pseudocapacitance, but the resulting defect structure formed a large number of pores with high edge roughness in the carbon material, which had a certain negative impact on the capacity properties of the materials. The above findings can provide technical support and a theoretical basis for controlling the pore networks and directionally optimizing the performances of supercapacitors by adjusting the pore structure of biochar.

Influences of Particle Size and Sulfuric Acid Treatment on the Electrochemical Performance of Bamboo Charcoal

Characterization and Electrochemical Performance of Bamboo Charcoal

Study on Bamboo-Derived Activated Carbon As Catalyst Support

Green Synthesis of Fe-Decorated Carbon Sphere/Nanosheet Derived from Bamboo for High-Performance Supercapacitor Application

Microporous Bamboo Biochar for Lithium-Sulfur Batteries

Preparation of High-Performance Porous Carbon Materials by Citric Acid-Assisted Hydrothermal Carbonization of Bamboo and Their Application in Electrode Materials

Enhanced performance of porous carbon microspheres from bamboo fiber for supercapacitors through acid-assisted hydrothermal carbonization

High Sulfur Loading in Activated Bamboo-Derived Porous Carbon As a Superior Cathode for Rechargeable Li–S Batteries

Preparation of Porous Biochar and Its Application in Supercapacitors

Bamboo Derived Activated Carbon As Highly Efficient Catalysts for the Oxidation and Adsorption of Hydrogen Sulfide at Room Temperature

Fermentation-hot pressing assisted preparation of bamboo green-activated carbon for supercapacitors

Synthesis and Characteristics of Nanoporous Carbon Spheres /S Composite as Cathode Material for Li-S Battery

Synthesis and Electrochemical Performance of Silicon/Carbon Composite Anodes Through Ball Milling and Spray Drying Pyrolysis Process

Effects of physical and chemical activations on the performance of biochar applied in supercapacitors

Dielectric barrier discharge low-temperature plasma modification of bamboo charcoal for supercapacitor applications

Synthesis of the electrochemically stable sulfur-doped bamboo charcoal as the anode material of potassium-ion batteries

Catalytic Graphitization for Preparation of Porous Carbon Material Derived from Bamboo Precursor and Performance as Electrode of Electrical Double-Layer Capacitor

Preparation of hierarchical porous carbon by pyrolyzing sargassum under microwave: The internal connection between structure−oriented regulation and performance optimization of supercapacitors

Regulation of Surface Oxygen Functional Groups and Pore Structure of Bamboo-Derived Hard Carbon for Enhanced Sodium Storage Performance

A pre-burning treatment facilitating formation of pores in biochars and reinforcing their electrochemical performance in supercapacitor

Preparation and Properties of Sulfur/Mesoporous Carbon Composite Cathode Materials