Abstract:Magnesium (Mg)-matrix composites have excellent damping and electromagnetic shielding properties. However, the mismatch between their strength and toughness limits their wide application. The aim of this work is to overcome the strength-toughness mismatch by constructing micro- and nanostructures while maintaining the good functional properties of Mg-matrix composites. Electrophoretic deposition (EPD) was used to spread carbon nanotubes (CNTs) out evenly on a Mg foil matrix. After spark plasma sintering (SPS), the grain organisation was refined, and the interlayer bonding was strengthened by hot rolling deformation. Finally, the microstructure, mechanical properties, damping properties, and electromagnetic shielding properties of the composites were analysed. Compared with the pure Mg laminates, the tensile strength and elongation of the CNT/Mg laminates were increased by 6.4% and 108.4%, respectively, with the significant improvement in toughness resulting from the increase in energy required for crack propagation due to the laminate structure. When the total rolling deflection reaches 80%, the interlayer bond strength of the material is significantly increased, the grain is further refined, and the strength and elongation of the composite material reaches the optimum, with the tensile strength reaching 241.70 MPa and the elongation reaching 6.90%. The interlayer interface and grain refinement also affected the damping Mg and electromagnetic shielding effect of the composites. This work provides an experimental idea for the preparation of high-performance structure-function integrated Mg-based materials.

Method of Preparing Mg-based Amorphous Composite Using Copper Mold Differential Pressure Casting

Preparation of Carbon-nanotube Reinforced Mg Based Bulk Metallic Glass Composites and Its Mechanical Properties

Mechanical Behavior of Carbon Nanotube-Reinforced Mg–Cu–Gd–Ag Bulk Metallic Glasses

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

Design and Preparation of CNTs/Mg Layered Composites

Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content

Strengthening and toughening mechanisms of CNTs/Mg–Al composites prepared via powder metallurgy combined with hot extrusion

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy

Preparation of Structure-Function Integrated Layered CNT/Mg Composites

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

Properties of Carbon Nano-tubes/Magnesiuum Matrix Composite by Casting

Progress of CNTs Reinforced Copper-based Composite Preparation

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Combination of enhanced thermal conductivity and strength of MWCNTs reinforced Mg-6Zn matrix composite

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

Strengthening and Toughening CNTs/Mg Composites by OpTimizing the Grinding Time of Magnesium Powder

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding