Abstract:Magnesium (Mg)-matrix composites have excellent damping and electromagnetic shielding properties. However, the mismatch between their strength and toughness limits their wide application. The aim of this work is to overcome the strength-toughness mismatch by constructing micro- and nanostructures while maintaining the good functional properties of Mg-matrix composites. Electrophoretic deposition (EPD) was used to spread carbon nanotubes (CNTs) out evenly on a Mg foil matrix. After spark plasma sintering (SPS), the grain organisation was refined, and the interlayer bonding was strengthened by hot rolling deformation. Finally, the microstructure, mechanical properties, damping properties, and electromagnetic shielding properties of the composites were analysed. Compared with the pure Mg laminates, the tensile strength and elongation of the CNT/Mg laminates were increased by 6.4% and 108.4%, respectively, with the significant improvement in toughness resulting from the increase in energy required for crack propagation due to the laminate structure. When the total rolling deflection reaches 80%, the interlayer bond strength of the material is significantly increased, the grain is further refined, and the strength and elongation of the composite material reaches the optimum, with the tensile strength reaching 241.70 MPa and the elongation reaching 6.90%. The interlayer interface and grain refinement also affected the damping Mg and electromagnetic shielding effect of the composites. This work provides an experimental idea for the preparation of high-performance structure-function integrated Mg-based materials.

What problem does this paper attempt to address?

This paper aims to solve the mismatch problem between strength and toughness in magnesium - matrix composites (Mg - matrix composites), which restricts their wide application. Although magnesium - matrix composites have excellent damping and electromagnetic shielding properties, the mismatch problem between their strength and toughness needs to be overcome by constructing micro - and nanostructures while maintaining the good functional characteristics of these materials. Specifically, the researchers evenly distributed carbon nanotubes (Carbon Nanotubes, CNTs) on the magnesium foil matrix by electrophoretic deposition (Electrophoretic Deposition, EPD) technology, then refined the grains by spark plasma sintering (Spark Plasma Sintering, SPS) and strengthened the inter - layer bonding force by hot - rolling deformation. Finally, the microstructure, mechanical properties, damping properties and electromagnetic shielding properties of these composites were analyzed. The research results show that compared with pure magnesium laminated materials, the tensile strength and elongation of CNT/Mg laminated materials are increased by 6.4% and 108.4% respectively. This is mainly because the layered structure increases the energy required for crack propagation, thus significantly improving the toughness of the material. When the total rolling deformation reaches 80%, the inter - layer bonding strength of the material is significantly increased, the grains are further refined, and the strength and elongation of the composites reach the optimum. The tensile strength reaches 241.70 MPa and the elongation reaches 6.90%. In addition, the inter - layer interface and grain refinement also affect the damping properties and electromagnetic shielding effect of the composites, providing experimental ideas for the preparation of high - performance structure - function integrated magnesium - based materials.

Preparation of Structure-Function Integrated Layered CNT/Mg Composites

Design and Preparation of CNTs/Mg Layered Composites

Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure

A Novel Processing for CNT-Reinforced Mg-Matrix Laminated Composites to Enhance the Electromagnetic Shielding Property

Simultaneous achievement of high electromagnetic shielding effectiveness (X-band) and strength in Mg-Li-Zn-Gd/MWCNTs composite

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability

Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content

Achieving high ductility in layered carbon nanotube/copper composite prepared by composite electrodeposition

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Strengthening and toughening mechanisms of CNTs/Mg–Al composites prepared via powder metallurgy combined with hot extrusion

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Interfacial properties and strengthening mechanisms of few-layered MXene reinforced Mg-based composites

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

Dispersion of CNT via an effective two-step method, and enhanced thermal conductivity of Mg composite reinforced by the dispersed CNT

Strengthening and Toughening CNTs/Mg Composites by OpTimizing the Grinding Time of Magnesium Powder

Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression

Influence of Soft Phase and Carbon Nanotube Content on the Properties of Hierarchical AZ61 Matrix Composite with Isolated Soft Phase

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films