Abstract:Carbon nanotubes (CNTs)-based materials have been the focus of intense research since their discovery because of their superior mechanical properties, good electrical conductivity and unique nano-effect of unique one dimensional nanostructures. Control and manipulation of the alignment of CNTs in the matrix can effectively affect the electrical, optical and mechanical properties of the composites. At present, there are many researches on the magnetic-field induced the alignment of CNTs in the polymer matrix, but less research on magnetic- field induced the alignment of CNTs in the metal matrix. In order to realize the alignment of CNTs in metal matrix, CNTs were firstly magnetically modified by electroless plating, and a uniform layer of cobalt nanoparticles was successfully plated on the surface of carbon nanotubes. For facilitating the macro-analysis of the different factors on the cobalt-carbon nanotubes directional effect, three kinds of matrixes (distilled water, vegetable oil and high viscosity glue) were used to simulate the magnesium alloy melt. The effects of ultrasonic, magnetic field and temperature on the Co coated CNTs dispersion and alignment in three kinds of matrix were studied by orthogonal test. It was found that the dispersion of CNTs was significantly affected by ultrasound and the alignment of CNTs affected by the magnetic field intensity. In this paper, the CNTs / Mg composites were prepared by liquid-state method and the wettability between CNTs and Mg alloy was improved by the modification of carbon nanotubes. Under the compound effect of ultrasonic and magnetic field, the alignment of the carbon nanotubes cluster in magnesium matrix composites was quantitatively characterized by Image J software. It is found that the Cobalt particles coated CNTs can respond well to magnetic field (typically 0.3–0.8T). With the increase of magnetic field strength, CNTs show higher relative frequencies along the magnetic field direction. When the magnetic field strength was 0.8T, the relative frequencies within 20-50° was 0.7. This indicated that Co-CNTs can achieve obviously alignment in AZ91D alloy under a low magnetic field. In addition, the compressive specimens were prepared according to the optimum process parameters determined by the orthogonal test. The compressive properties of the composites parallel to and perpendicular to the direction of the magnetic field were studied. The results shown that the compressive strength of the Co-CNTs/Mg composites was obviously higher than that of the magnesium matrix and exhibited anisotropy due to directional aligned carbon nanotube.

A Novel Processing for CNT-Reinforced Mg-Matrix Laminated Composites to Enhance the Electromagnetic Shielding Property

Characterization of Single- and Multiwalled Carbon Nanotube Composites for Electromagnetic Shielding and Tunable Applications

Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure

Simultaneous achievement of high electromagnetic shielding effectiveness (X-band) and strength in Mg-Li-Zn-Gd/MWCNTs composite

Emi Shielding Effectiveness of Silver Nanoparticle-Decorated Multi-Walled Carbon Nanotube Sheets

Preparation of Structure-Function Integrated Layered CNT/Mg Composites

Research on mechanical properties and electromagnetic shielding effectiveness in Mg-8Li-2Y-Zn/Al multilayered composites fabricated by asymmetric accumulative roll bonding

Design and Preparation of CNTs/Mg Layered Composites

The Evolution of Microstructure and Electromagnetic Interference Shielding Effectiveness of Mg-2Mn-1Ce Alloy Prepared by Accumulative Roll Bonding Process

X-band shielding properties of Mg-9Li matrix composite containing Ni0.4Zn0.4Co0.2Fe2O4 fabricated by multi-layer composite rolling

A Novel Method to Fabricate CNT/Mg–6Zn Composites with High Strengthening Efficiency

A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes

Enhanced Mechanical Properties of CNTs/Mg Biomimetic Laminated Composites

Electromagnetic Interference Shielding Properties of Nickel-Coated Carbon Fiber Veil/Acid-Functionalized Mwcnts/Epoxy Multiscale Composites

Experiment and simulation of flexible CNT/SA/PDMS electromagnetic shielding composite

Processing, Microstructure and Mechanical Properties of a Novel Mg Matrix Composites Reinforced with Urchin-Like CNTs@SiCp

Enhanced Electromagnetic Interference Shielding Properties of CNT/Carbon Composites by Designing a Hierarchical Porous Structure

Fabrication and Mechanical Properties of CNTs/Mg Composites Prepared by Combining Friction Stir Processing and Ultrasonic Assisted Extrusion

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Fabrication and Characterization of Aligned Carbon Nanotubes Cluster Reinforced Magnesium Composite Based on Ultrasound/Magnetic Compound Field

Microstructure and properties of carbon nanotubes-reinforced magnesium matrix composites fabricated via novel in situ synthesis process