Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Construction Monitoring for PC Composite Box-girder Bridge with Corrugated Steel Webs

Key Techniques for Erection of Steel Truss Girders of Dashengguan Changjiang River Bridge in Nanjing

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Safety Control Research of Steel U Girder of Composite Bridge with Incremental Launching Construction

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Study on Health Monitoring System Design of Cable-Stayed Bridge

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Healthy monitoring and altering system on-line of bridge structures Ⅰ——Design for monitoring assessment,altering system and modules

Key Construction Technology and Monitoring of Long-Span Steel Box Tied Arch Bridge

SIMULATION FOR CONSTRUCTION PROCESS OF P.C. CONTINUOUS RIGID FRAME BRIDGE

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

Pursuit for Industrialized Construction of Nanjing Jiangxinzhou Yangtze River Bridge

Monitoring and Control for Large Span Cable-stayed Bridge

Study of construction control for Heigou Super-large Bridge in Inner Mongolia

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Overview of integrated health monitoring system installed on cable-stayed bridge and preliminary analysis of results

Asymmetric Cantilever Construction Control of a U-Shaped Box Concrete Continuous Bridge in Complex Environment

Closure Construction Monitoring Technology of the Super Long-span Steel Tied-arch Truss Bridge