Renovated Electro-Absorptive Desalination by Using Activated Carbon Coating Electrodes

Yan ZHAO,Xiao-min HU,Shi-liang SHAN

DOI: https://doi.org/10.3969/j.issn.1009-6094.2012.03.007

2012-01-01

Abstract:The present paper would like to introduce a renovated electro-absorptive desalination method by using activated carbon coating electrodes.Since it is of great importance to remove ion from aqueous solutions both in natural environment and in industrial processes,for example,the desalination of seawater,there has been existing a promising method commonly known as capacitive deionization(CDI) for saline ion removal.It is just for satisfying such a need,we have developed a simplistic CDI cell reactor which we name flowing-through-capacitor(FTC) to study the mechanism of the electrosorptive desalination.In our work,we have prepared some activated carbon-coating electrodes in a simple and economic manner by coating a slurry mixture made of activated carbon powder(ACP) in a polymer solution including binder poly vinylidene fluoride(PVDF) and conductive graphite powder dissolved in di-methylacetamide(DMAc) on the current collector(a graphite plate).And,then,the mixture and the electric current collector were let to dry at 60 in a vacuum stove,in which the electrodes could be made to turn into activated carbon powder with a ratio of PVDF: graphite powder in 8:1:1.The electrodes here prepared can be characterized by using Scanning Electronic Microscopy(SEM) and Electrochemical workstation to analyze their surface morphology and electrochemical performance.The results of the SEM indicate that the activated carbon powder and PVDF binders tend to be effectively bonded.Measuring the cyclic voltammetry(CV) through a three-electrode-system in the CHI660 electrochemical workstation,we can obtain the specific capacitance from CV was 59.2 F/g.And,as a result,we can find that the influential factors of the electrodes chosen may have bias potential with their flowing rate and the distance between them.The best reaction conditions obtained by optimizing the affecting factors can be shown as follows: the bias potential was 1.6 V,the flowing rate was 10 L/min,the distance between the two electrode plates is 2 m,and in so doing,the highest desalination efficiency would be made to reach 47.9%.Investigating the reproducibility,cutting off the power supply when the electrosorption was let to keep the state of equilibrium,we can find that the electrodes could be regenerated in a short period.The results indicate that the electrosorption desalination technology we have renovated enjoys advantages of low cost,energy-saving with no secondary pollutant,hance available for practical application.