Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Temperature Dependence and Effect on Surface Roughness in Abrasive Flow Machining

Understanding the Effects of Surface Roughness on the Temperature and Pressure Relevancy of Water Contact Angles

On surface texture evolution in abrasive flow machining

Unraveling the Synergistic Effects of Solid Surface Material and Temperature on the Contact Angle of Water under an Elevated Pressure: an Experimental Study

Impact of fluid abrasive viscosity on machining performance

Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process

Effect of Number of Cycles on Polishing Effect in Abrasive Flow Machining

Influence of Thermal-mechanical Coupling of Single Particle on Grinding Surface Roughness

Fe Analysis of the Effects of Cutting Speed on Thermomechanical Responses of Aisi 4142 Steel in High Speed Cutting

Numerical Analysis for Influence of Temperature on Polishing Quality of Dispensing Deads by Multi-physics Coupled Field Abrasive Flow

Towards the Determination of Machining Allowances and Surface Roughness of 3D-Printed Parts Subjected to Abrasive Flow Machining

Experimental Investigations into Abrasive Flow Machining of Helical Gear

Mechanism of the effect of plastic deformation at different temperatures on the surface roughness of machined aluminum mirrors

Temperature Measurement during Abrasive Water Jet Machining (AWJM)

Molecular Dynamics Simulation Study on the Influence of the Abrasive Flow Process on the Cutting of Iron-Carbon Alloys (α-Fe)

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Particle collision-based abrasive flow mechanisms in precision machining

Research on the influence of ultra-low temperature extreme environments on the surface quality and fatigue life of FeCoCrNiAl 0.6 high entropy alloy

Study on temperature and hardness behaviors of Al-6060 alloy during magnetic abrasive finishing process using artificial neural networks

Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method

Influence of AFM Scanning Parameters on Surface Roughness Measurement