Abstract:The abrasive flow machining (AFM) technique has great potentials for machining micro and complicated structures, when the specific media with both favorable fluidity and machinability are essential. In the present study, components, structures and rheological behaviors of a typical type of media were analyzed, based on with the material removal mechanism was firstly discussed. The Carreau-Yasuda model was applied for simulating the AFM process, in which the shear viscosity and relative parameters were precisely determined by analyzing the rheological behaviors of the media. The wall slipping behavior was analyzed and defined by the Generalized Navier slipping model. It was showed that the polymer melt and plasticizer oil presented similar compositions and structures, containing linear chains with few side groups, contributing to the fluidity of the media. The intense peak value in the creep curve (3.55 Pa-1) demonstrated a higher value of the viscous component than that of the elastic component, while the occurrence of saltatory regression further verified the linear structure of polymer chains. Owing to the retraction of streamlines from larger chambers into micro structures, and the combined effects of the shear stress and first normal stress difference, the polymer chains remained in stretched states, leading to uniform indentation depths and machining effects all over the machined surfaces. The flow velocity in the micro holes, which was obtained by the new simulation method, was roughly 1.5 m/s, proving that the retention time (2 x 10-3 s) was much shorter than the relaxation time of the media (230 s), indicating long-standing stretched states. The homogenous and a certain degree of shear stress, storage and loss moduli close to the inner hole surface further verified the favorable and uniform machining effects. This research is valuable for guiding the design of the media and abrasive flow machining procedures for micro structures, from aspects of either experiments or simulations.

Towards the Determination of Machining Allowances and Surface Roughness of 3D-Printed Parts Subjected to Abrasive Flow Machining

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Abrasive flow finishing of 3D-Printed Aerofoils: Design, numerical Simulation, and experimental analysis

Model of surface roughness and material removal using abrasive flow machining of selective laser melted channels

On Establishment and Validation of a New Predictive Model for Material Removal in Abrasive Flow Machining

Study on Rheological Behaviors of Media and Material Removal Mechanism for Abrasive Flow Machining (AFM) Micro Structures and Corresponding Simulations

Rheological characterisation of abrasive media and finishing behaviours in abrasive flow machining

Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process

On surface texture evolution in abrasive flow machining

A Comprehensive Model to Predict Friction Factors of Fluid Channels Fabricated Using Laser Powder Bed Fusion Additive Manufacturing

Internal Surface Quality Enhancement of Selective Laser Melted Inconel 718 by Abrasive Flow Machining

Machinability and Mechanism of Abrasive Flow Machining Ultra-Precision Surface with Orientated Grinding Marks

Abrasive flow machining (AFM) finishing of conformal cooling channels created by selective laser melting (SLM)

Modeling and Simulation of Material Removal Rates and Profile Accuracy Control in Abrasive Flow Machining of the Integrally Bladed Rotor Blade and Experimental Perspectives

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Integrated Modelling and Analysis of Micro-Cutting Mechanics with the Precision Surface Generation in Abrasive Flow Machining

An efficient approach to improving the finishing properties of abrasive flow machining with the analyses of initial surface texture of workpiece

Surface Roughness Analysis of 3D Printed Microchannels and Processing Characteristics of Abrasive Flow Finishing

A Study on the Influences of Abrasive Media's Viscoelasticity on Entrance Effect in Abrasive Flow Machining

Investigation on Finishing Mechanism and Modelling on Material Removal for Abrasive Flow Machining Micro-Channels with Asperity Surface

Abrasive flow machining of additively manufactured metal grilling parts