Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Experimental Investigations into Abrasive Flow Machining of Helical Gear

Analytical Solution to Bending and Contact Strength of Spiral Bevel Gears in Consideration of Friction

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of Sio2f/Sio2 Composites

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

On surface texture evolution in abrasive flow machining

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Analytical modeling of abrasive grain-workpiece cutting coefficient and experimental investigation on tangential ultrasonic vibration-assisted forming grinding gear

Analysis on wear patterns and mechanisms of carbide tool for face-hobbing of spiral bevel gear

Research on quality control of precision machining straight internal gear by abrasive flow based on large eddy simulation

Experimental investigation on the effet of input paramètres on surface roughness and MRR of abrasive flow machining process

Formation mechanism study on tooth surface of two gear finishing processes: combined theoretical and experimental approaches

Optimizing Surface Finish in FDM-Printed Polycarbonate Spur Gears through Abrasive Flow Finishing: Insights from Physics and Material Science Perspectives

Experimental Investigation on Microstructure Alteration and Surface Morphology While Grinding 20cr2ni4a Gears with Different Grinding Allowance Allocation

Particle collision-based abrasive flow mechanisms in precision machining

Tangential Ultrasonic-Vibration Assisted Forming Grinding Gear: An Experimental Study

Simulation and experimental study of tool wear in high-speed dry gear hobbing

Position-dependent rough surface formation in face gear worm grinding

Numerical modeling of material removal mechanism and surface topography for gear profile grinding

Towards the Determination of Machining Allowances and Surface Roughness of 3D-Printed Parts Subjected to Abrasive Flow Machining

Investigation on formation mechanism of surface texture and modeling of surface roughness with internal gear power honing

Research on the underlying mechanism behind abrasive flow machining on micro-slit structures and simulation of viscoelastic media