Abstract:This paper aims to investigate the impact of various cutting parameters on the micro-cutting mechanism of high-entropy alloy FeCoCrNiAl0.6. It examines the cutting force, cutting temperature, and residual stress of FeCoCrNiAl0.6 high-entropy alloy micro-cutting using the finite element simulation method. The research findings reveal the following: as the cutting depth increases, the three-dimensional cutting force gradually rises, exhibiting a significant growth trend, and there is a positive correlation between them. Increasing the cutting speed results in small fluctuations in cutting force, which remains relatively stable. Moreover, the cutting force gradually increases with higher feed rates, demonstrating a positive correlation. The maximum temperatures of the tool surface and chip surface increase with higher cutting depth, and they are positively correlated. There is a positive correlation between cutting temperature and cutting speed. With increased cutting speed, the maximum temperature of the cutting surface steadily rises. Simultaneously, during cutting, the chip temperature increases at a faster rate compared to the tool temperature with increasing cutting speed. As the feed rate continuously increases, the maximum temperatures of the chip surface and tool surface show a steady growth trend, and there is a positive correlation between them. During the cutting process, the workpiece surface is predominantly characterized by residual compressive stress. Under different cutting depths, the absolute value of the maximum residual compressive stress on the workpiece surface decreases. Under the influence of cutting speed, when the cutting speed is below 110 mm/s, the residual compressive stress on the workpiece surface demonstrates an increasing trend. For cutting speeds between 110 and 170 mm/s, the workpiece surface initially exhibits a decreasing trend followed by an increasing trend. Increasing the feed rate leads to an increase in the absolute value of the maximum residual compressive stress on the workpiece surface.

Research on the influence of ultra-low temperature extreme environments on the surface quality and fatigue life of FeCoCrNiAl 0.6 high entropy alloy

Study on Surface Integrity and Fatigue Performance of FeCoCrNiAl0.6 High-Entropy Alloy Based on Thermo-Mechanical Coordinated Control

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

An investigation on the wear and subsurface deformation mechanism of CoCrFeMnNi high entropy alloy at subzero temperature

Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy

Precision machining performance and mechanism of Ni/Ni 3 Al alloy under cryogenic temperature

Effect of interlayer temperature and extremely low terminal cooling temperature on the microstructure and wear resistance of Fe-based hardfacing alloy

High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys

Effects of Ultra-Low Temperatures on the Mechanical Properties and Microstructure Evolution of a Ni-Co-Based Superalloy Thin Sheet during Micro-Tensile Deformation

Mechanical Properties and Tribological Behavior of Al0.5CoCrFeNb0.5Ni High-Entropy Alloy at High Temperatures

Cryogenic Mechanical Behaviors of CrMnFeCoNi High-Entropy Alloy

Molecular Dynamics Study on Wear Resistance of High Entropy Alloy Coatings Considering the Effect of Temperature

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy

Fatigue and fracture behavior of an aluminum-lithium alloy 8090-T6 at ambient and cryogenic temperature

Tool Wear and Surface Integrity of γ-TiAl Cryogenic Coolant Machining at Various Cutting Speed Levels

Enhanced tensile properties and wear resistance of additively manufactured CoCrFeMnNi high-entropy alloy at cryogenic temperature

Dynamic mechanical responses of the Al0·1CoCrFeNi high entropy alloy at cryogenic temperature

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature

Temperature dependence of the deformation behavior and mechanical properties of a Fe–Mn–Al–C low-density steel for cryogenic application

Machinability and chip morphology evolution of hardened stainless steel using liquid nitrogen cryogenic