Abstract:Carbon nanotubes (CNTs) have exhibited immense potential for applications in biology and medicine, and once their intended purpose is fulfilled, the elimination of residual CNTs is essential to avoid negative effects. In this study, we demonstrated the effective collection and simple removal of CNTs dispersed in a suspension via thermal convection. First, a tapered fiber tip with a cone angle and end diameter of 10° and 3 μm, respectively, was fabricated via a heating and pulling method. Further, a laser beam with a power and wavelength of 100 mW and 1.55 μm, respectively, was launched into the tapered fiber tip, which was placed in a CNT suspension, resulting in the formation of a microbubble on the fiber tip. The temperature gradient on the microbubble and suspension surface induced thermal convection in the suspension, which resulted in the accumulation of CNTs on the fiber tip. The experimentally formed CNT cluster possessed a circular top surface with a diameter of 87 μm and an arched cross-section with a height of 19 μm. Furthermore, this CNT cluster was firmly attached to the fiber tip. Therefore, the removal of CNT clusters can be realized by simply removing the fiber tip from the suspension. Moreover, we simulated the thermal convection that caused CNT aggregation. The obtained results indicate that convection near the fiber tip flows toward it, which pushes the CNTs toward the fiber tip and enables their attachment to it. Further, the flow velocity is symmetrically distributed as a Gaussian function, which results in the formation of a circular top surface and arched cross-sectional profile for the CNT cluster. Our method may be applied in biomedicine for the collection and removal of nano-drug residues.

Laser Induced Selective Removal of Metallic Carbon Nanotubes

Laser assisted selective removal of metallic carbon nanotubes

Thermal Analysis For Laser Selective Removal Of Metallic Single-Walled Carbon Nanotubes

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Femtosecond Laser Irradiation Of Carbon Nanotubes To Metal Electrodes

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Light-induced Thermal Convection for Collection and Removal of Carbon Nanotubes

Selective Etching of Metallic Carbon Nanotubes by Gas-Phase Reaction

Selective silencing of the electrical properties of metallic single-walled carbon nanotubes by 4-nitrobenzenediazonium tetrafluoroborate

Controlled Removal of Individual Carbon Nanotubes from Vertically Aligned Arrays for Advanced Nanoelectrodes

Selective Electrochemical Etching of Single‐Walled Carbon Nanotubes

Femtosecond Laser Treatment of SWNT Onto Metal Electrodes and Its Effect on Carbon Nanotube Field Effect Transistor

What Can Lasers Do in the Nano-Fabrication of Carbon Nanotube Based Devices?

Microwave Purification of Large-Area Horizontally Aligned Arrays of Single-Walled Carbon Nanotubes

Direct Identification of Metallic and Semiconducting Single-Walled Carbon Nanotubes in Scanning Electron Microscopy.

Selective Sorting of Metallic/semiconducting Single-Walled Carbon Nanotube Arrays by 'Igniter-Assisted Gas-Phase Etching

Demetalization of Single-Walled Carbon Nanotube Thin Films with Microwave Irradiation

Ablating of Carbon Nanotube by Laser Beam and Its Effect on Field Emission Performance

Metallic/Semiconducting Nanotube Separation and Ultra-thin, Transparent Nanotube Films

Photocatalytic Engineering of Single-Walled Carbon Nanotubes: from Metal-to-semiconductor Conversion to Cutting and Patterning.