Abstract:Large amounts of single-wall carbon nanotubes(SWNTs) deposited on all the wall of the chamber have been obtained in helium and nitrogen mixed atmosphere using Co-Ni alloy catalyst with a modified arc furnace which can control the temperature during arcing process. Additionally, there are many weblike deposition products located between the cathode and anode. By twostep purification:the as-grown SWNT was heated in air at 500℃ for 30min, then soaked in 37% hydrochloric acid for 72h and filtered with deionized water. Microanalysis was carried out by Transmission electron microscopy(TEM), high-resolution TEM and Raman spectroscopy. The results obtained indicate that the purified SWNTs have high purity (higher than 95%) and uniform diameter (from 1.24 to 1.38nm).This experiment indicates that the temperature strongly affects the production of SWNT; the production and purity of SWNT increase with temperature. When the temperature is 600℃, the purity is about 70% and the production of SWNT is 12g/h.

Effect of Heat-Pretreatment of the Graphite Rod on the Quality of SWCNTs by Arc Discharge

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

The Effect of Electric Current on the Synthesis of Single-Walled Carbon Nanotubes by Temperature Controlled Arc Discharge

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Improving the Synthesis of Single-Walled Carbon Nanotubes by Pulsed Arc Discharge in Air by Preheating the Catalysts

Catalyst Effect on the Preparation of Single-Walled Carbon Nanotubes by a Modified Arc Discharge

Effects of Catalyst Composition on the Synthesis of Single-Walled Carbon Nanotubes

Large Scale Synthesis of Single-Wall Carbon Nanotubes by Arc-Discharge Method

Catalyst composition and content effects on the synthesis of single-walled carbon nanotubes by arc discharge

Current and Arc Pushing Force Effects on the Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge.

A Novel Method to Produce Large Amount Single-Walled Carbon Nanotubes by Arc Discharging

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Influence of Heat Treatment on Field Emissive Properties of Single-Walled Carbon Nanotubes

Large Scale and High Purity Synthesis of Single-Walled Carbon Nanotubes by Arc Discharge at Controlled Temperatures

Effect of purification on the electron structure and field emission characteristics of a carbonaceous material containing single-wall carbon nanotubes

The Effect of Catalyst Concentration on the Synthesis of Single-Wall Carbon Nanotubes

Temperature and Catalyst Effects on the Production of Amorphous Carbon Nanotubes by a Modified Arc Discharge

Mass-production of single-wall carbon nanotubes by arc discharge method

Arc Synthesis of Double-Walled Carbon Nanotubes in Low Pressure Air and Their Superior Field Emission Properties

Post-treatment method for improving field emission from carbon nanotubes/nanofibers

High Temperature Treatment and Characterization of Carbon Nanotubes