Abstract:Thin-walled, open-ended, and well-aligned N-doped carbon nanotubes (CNTs) on the quartz slides were synthesized by using acetonitrile as carbon sources. As-obtained products possess large thin-walled index (TWI, defined as the ratio of inner diameter and wall thickness of a CNT). The effect of temperature on the growth of CNTs using acetonitrile as the carbon source was also investigated. It is found that the diameter, the TWI of CNTs increase and the Fe encapsulation in CNTs decreases as the growth temperature rises in the range of 780–860°C. When the growth temperature is kept at 860°C, CNTs with TWI = 6.2 can be obtained. It was found that the filed-emission properties became better as CNT growth temperatures increased from 780 to 860°C. The lowest turn-on and threshold field was 0.27 and 0.49 V/μm, respectively. And the best field-enhancement factors reached 1.09 × 10 5 , which is significantly improved about an order of magnitude compared with previous reports. In this study, about 30 × 50 mm 2 free-standing film of thin-walled open-ended well-aligned N-doped carbon nanotubes was also prepared. The free-standing film can be transferred easily to other substrates, which would promote their applications in different fields.

Temperature Effect on Synthesis of Different Carbon Nanostructures by Sulfur-Assisted Chemical Vapor Deposition

Effect of Sulfur on Enhancing Nitrogen-Doping and Magnetic Properties of Carbon Nanotubes

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Temperature Selective Growth Of Carbon Nanotubes By Chemical Vapor Deposition

Effect of Sulfur on the Growth of Carbon Nanotubes by Detonation-Assisted Chemical Vapor Deposition

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Hydrothermal Synthesis of Cobalt Sulfide Nanotubes: the Size Control and Its Application in Supercapacitors

The influences of synthesis temperature and Ni catalyst on the growth of carbon nanotubes by chemical vapor deposition

Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism

The Effect of Sulfur on the Number of Layers in a Carbon Nanotube

Sulfur‐Assisted Approach for the Low‐Temperature Synthesis of Β‐sic Nanowires

Temperature effect on the preparation of MWNTs using thermal chemical vapor deposition

Synthesis of carbon nanotubes and carbon onions by CVD using a Ni/Y catalyst supported on copper

Growth temperature effect on field emission properties of printable carbon nanotubes cathode

Temperature and carbon source effects on methane–air flame synthesis of CNTs

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Effects of Temperature and Catalyst Concentration on the Growth of Aligned Carbon Nanotubes

Temperature and Catalyst Effects on the Production of Amorphous Carbon Nanotubes by a Modified Arc Discharge

Synthesis and Enhanced Field-Emission of Thin-Walled, Open-Ended, and Well-Aligned N-Doped Carbon Nanotubes

Low‐Temperature Growth of Carbon Nanotubes Catalyzed by Sodium‐Based Ingredients

Effect of Heat-Pretreatment of the Graphite Rod on the Quality of SWCNTs by Arc Discharge