Abstract:In this study, shear rheological polishing was used to polish the Si surface of six-inch 4H-SiC wafers to improve polishing efficiency. The surface roughness of the Si surface was the main evaluation index, and the material removal rate was the secondary evaluation index. An experiment was designed using the Taguchi method to analyze the effects of four critical parameters (abrasive particle size, abrasive particle concentration, polishing speed, and polishing pressure) on the Si surface polishing of SiC wafers. By evaluating the experimental results for the signal-to-noise ratio, the weight of each factor was calculated using the analysis of variance method. The optimal combination of the process parameters was obtained. Below are the weightings for the influence of each process on the polishing result. A higher value for the percentage means that the process has a greater influence on the polishing result. The wear particle size (85.98%) had the most significant influence on the surface roughness, followed by the polishing pressure (9.45%) and abrasive concentration (3.25%). The polishing speed had the least significant effect on the surface roughness (1.32%). Polishing was conducted under optimized process conditions of a 1.5 μm abrasive particle size, 3% abrasive particle concentration, 80 r/min polishing speed, and 20 kg polishing pressure. After polishing for 60 min, the surface roughness, Ra, decreased from 114.8 to 0.9 nm, with a change rate of 99.2%. After further polishing for 60 min, an ultrasmooth surface with an Ra of 0.5 nm and MRR of 20.83 nm/min was obtained. Machining the Si surface of 4H-SiC wafers under optimal polishing conditions can effectively remove scratches on the Si surface of 4H-SiC wafers and improve the surface quality.

Achievement of a near-perfect smooth silicon surface

Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishing

Chemical Mechanical Polishing (CMP) of On-Axis Si-face 6H-Sic Wafer for Obtaining Atomically Flat Defect-Free Surface

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Realization of atomic-level smooth surface of sapphire (0001) by chemical-mechanical planarization with nano colloidal silica abrasives

Research on Surface Topography of Silicon Wafer in Chemical-mechanical Polishing

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Chemical Mechanical Planarization (cmp) of On-Axis Si-Face Sic Wafer Using Catalyst Nanoparticles in Slurry

Improving monocrystalline silicon surface quality with chemical mechanical polishing using the slurry with the additive of isopropanol

Atomic-level flatness on oxygen-free copper surface in lapping and chemical mechanical polishing

XPS and AFM study of chemical mechanical polishing of silicon nitride

Optimization and Mechanism of SiO2-Based Slurry Components for Atomically Smooth Gallium Nitride Surface Obtained Using Chemical Mechanical Polishing Techniques

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Experimental Study on Shear Rheological Polishing of Si Surface of 4H-SiC Wafer

Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

A novel slurry for chemical mechanical polishing of single crystal diamond