Abstract:An AC excitation power supply will produce a series of harmonic currents in motors compared to the conventional power supply, increase the time harmonic component, and then generate a harmonic magnetic field; harmonics will cause motor vibrations and noise in the motor and will produce a corresponding additional loss, increasing the motor temperature rise; these key technical problems need to be solved in domestic pumped storage AC excitation motor engineering applications. Herein, the no-load loss characteristic test of a 3 MW alternating current excited motor was mainly carried out using a test prototype of the 3 MW alternating current excitation motor. Further, with the aid of the finite element method, the numerical study of the no-load loss characteristics of a 3 MW alternating current excited motor was performed. The relationship between the key factors such as the no-load characteristics, no-load loss characteristics, and constant loss and voltage per unit value is analyzed, and the variation law of the no-load core loss of motors under different loads is explored. The results demonstrate that, under no-load conditions, when the applied voltage was less than the rated voltage, the voltage was proportional to the current. When the applied voltage was more significant than the rated voltage, the current increased as the voltage increased, but the relationship between the two was no longer proportional. The constant loss of the motor maintained a linear relationship with the square of the unit value of the voltage scale. When the square of the unit value of the voltage scale was zero, the loss was equivalent to the wind friction loss under no load. The core loss increased with the increase in load, and the greater the load, the faster the increase rate of the motor iron loss. The comparison deviation between the test and simulation results was less than 10%. The simulation and experimental results verified the effectiveness of finite element modeling and the finite element calculation method.

A De-excitation Simulation of No-load Hydro-turbine Generator with Damping Winding

A De-excitation Study of Synchronous Generator at Fault

An Application Study of a New De-Excitation Method for Generator with Self-Shunt Excitation

De-Excitation Simulation of 1 000 MW Steam-turbine Generator after Abrupt Three-phase Short Circuit

Coupled field finite element analysis for turbine generator under loss-of-excitation asynchronous operation

Selection of De-excitation Resistors for Hydraulic Generators

Analysis of Negative Sequence Ability of Hydro-Generator Based on Equivalent Time-Harmonic Coupled Finite-Element Method

The dynamic performance and temperature distribution of turbine generator under loss of excitation by using coupled FE analysis

Operation Control and Space Vector Analysis on Doubly Fed Wind Power Generator

New De-excitation Method for Large Hydraulic Generator

Simplified Mathematical Model of Inter-Turn Short Circuit of Field Windings in Hydro-Generators and Its Application

Thermal Modeling and Experimental Validation in the Rotor Region of Hydrogenerator With Different Rotor Structures

Discussion on De-excitation with Serially Connected Varistors

Modeling and Control of a Wind-Turbine-driven DFIG Incorporating Core Saturation During Grid Voltage Dips

The influence of electromagnetic field models on the damper winding loss and heat calculation results of tubular hydro‐generator

The Design and Application of Excitation System of Jinghong Hydropower Plant

Influence of Complex Fluid Flow on Temperature Distribution in the Rotor Region of Large Hydrogenerator Under the Rotor Rotation

Experimental study of the pulse propagation in turbine generator stator windings

Impact of excitation windings with different cooling structures on cooling performance and cost of a full air-cooled pumped storage power generator/motor

Evaluation of damping of windings in a generator using oscillation energy dissipation

Experimental Study on No-Load Loss Characteristics of an Alternating Current Excitation Motor