Abstract:Copper-containing sludge is a common by-product of industrial activities, particularly electroplating and metal processing. This type of sludge contains high concentrations of heavy metals such as copper, which can pose a potential threat to the environment. Therefore, its treatment and disposal require special attention. Due to its efficient mass and heat transfer characteristics, the suspended state technology has shown significant potential for application in a number of key processes, including the drying, decomposition, and reduction of copper-containing sludge. This paper presents an in-depth analysis of the current status of the application of the suspended state technology in the treatment of copper-containing sludge. Based on this analysis, a device for the treatment of copper-containing sludge in the suspended state was designed, through which the characteristics of copper-containing sludge in the oxidative decomposition and reduction phases are investigated. The research objects were gas concentration, temperature, contact state, and particle size time. Orthogonal experiments were initially employed to investigate the relationship between the influencing factors and the conversion rate of copper oxides. This was followed by a single-factor influence study, which led to the determination of the optimal process parameters for the decomposition experiments of the Cu-containing sludge in an oxidizing atmosphere. The 100 μm Cu-containing sludge was reacted with 10% O2 gas at a flow rate of 1 m/s for 3 min under the condition of 900 °C. The process parameters were then determined as follows: The research objects were gas concentration, temperature, contact state, and particle size time. Orthogonal experiments were employed to investigate the relationship between the influencing factors and the copper conversion rate. This was followed by a single-factor influence study, which determined the optimal process parameters for the copper-containing sludge reduction experiments. The 200 μm copper-containing sludge was reacted for 5 min at a flow rate of 7% carbon monoxide at a flow rate of 1.5 m/s under the condition of 800 °C.

Study on Disposal Diluent Waste Water of Copper in Spouted Bed Electrode with a Draft Tube

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Electrochemical Analysis of Cathode in TSV Copper Electroplating

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

Study on the performance of EDI device in dealing with Ni2+solution with dilute departments filled with cation exchange resins

Study on the mechanism of copper and arsenic separation in copper smelting acidic solution by arsenic sulfide residue

Effect of Particle Conductivity of a Packed Bed Reactor on the Electrowinning of Copper

Research on Depth Dechlorination by Copper Slag Valence Regulation of Synergistic High-Activity Copper in the Ultrasonic Field

Mechanism and kinetics study on waste acid leaching from copper smelting dust

Preparation of fine copper powders by galvanostatic regime of electrolysis of copper scrap in a cylindrical electrochemical cell

Experimental analysis of the performance of innovative circulation configurations for cleaner copper electrolysis

Mechanism study of the effect of copper ions on the stability of As(III) sulfuration precipitation in acidic copper smelting wastewater

Advanced Treatment of Copper Smelting Wastewater by the Combination of Internal Micro-Electrolysis and Electrocoagulation

Green Recycle of Copper Ions in Saccharin Sodium Wastewater by Direct Electrodeposition Using Rotating Thin Copper Disc Electrode

Experimental Study on Separation of Iron and Arsenic from Copper Sulfate Solution

Modification of Ti/Sb-SnO2/PbO2 Electrode by Active Granules and Its Application in Wastewater Containing Copper Ions

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Studies on Treatment of Copper Pickling Wastewater with Electrode-Biomembrane Technique

Research on Resource Recovery and Disposal of Copper-Containing Sludge

Through silicon via filling by copper electroplating in acidic cupric methanesulfonate bath