Abstract:Heavy metals in industrial wastewaters are typically present as stable metal–organic complexes with their cost-effective treatment remaining a significant challenge. Herein, a self-enhanced decomplexation scenario is developed using an electrochemical membrane filtration (EMF) system for efficient decomplexation and Cu recovery. Using Cu-EDTA as a model pollutant, the EMF system achieved 81.5% decomplexation of the Cu-EDTA complex and 72.4% recovery of Cu at a cell voltage of 3 V. The •OH produced at the anode first attacked Cu-EDTA to produce intermediate Cu-organic complexes that reacted catalytically with the H2O2 generated from the reduction of dissolved oxygen at the cathode to initiate chainlike self-enhanced decomplexation in the EMF system. The decomplexed Cu products were further reduced or precipitated at the cathodic membrane surface thereby achieving efficient Cu recovery. By scavenging H2O2 (excluding self-enhanced decomplexation), the rate of decomplexation decreased from 8.8 × 10–1 to 4.1 × 10–1 h–1, confirming the important role of self-enhanced decomplexation in this system. The energy efficiency of this system is 93.5 g kWh–1 for Cu-EDTA decomplexation and 15.0 g kWh–1 for Cu recovery, which is much higher than that reported in the previous literature (i.e., 7.5 g kWh–1 for decomplexation and 1.2 g kWh–1 for recovery). Our results highlight the potential of using EMF for the cost-effective treatment of industrial wastewaters containing heavy metals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05554</a>.Section S1: Assembly of the membrane module; Section S2: Setup of the EMF reactor; Section S3: Setup of the H-type two-compartment electrochemical cell; Section S4: Characterizations of the titanium mesh and conductive membrane; Section S5: Membrane properties of the conductive membrane; Section S6: Filtration test of the conductive membrane using real wastewater; Section S7: Evolution of H2O2 concentration during each experiment; Section S8: TMP evolution during the experiment; Section S9: Rate constants obtained in the two-compartment cell experiment; Section S10: Desorption results of each experiment; Section S11: Intermediates formed at different voltages; Section S12: Decomplexation experiments of each Cu-organic complex; Section S13: Evolution of the Cu(I) species concentration during each experiment; Section S14: Probability of decomplexation or reduction/precipitation of certain intermediates; Section S15: Cyclic voltammograms under an anodic scan; Section S16: Decomplexation and Cu recovery performance in the treatment of real wastewater; Section S17: mass transfer rate constant calculation; and Section S18: Energy efficiency and EE/O calculation (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05554/suppl_file/es0c05554_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Advanced Treatment of Copper Smelting Wastewater by the Combination of Internal Micro-Electrolysis and Electrocoagulation

A Combined Electrocoagulation-Electrooxidation Treatment on Ctmp Wastewater

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Volatilization of Zn and Pb and Preparation of Integrated Micro-Electrolysis Filter from Copper Slag and Its Application for Removing Cr(VI) from Aqueous Solution.

Combined Electrodialysis and Electrocoagulation as Treatment for Industrial Wastewater Containing Arsenic and Copper

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery.

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Pretreatment of Coking Wastewater by Copperized Iron Internal Electrolysis System

Highly efficient and energy-conserved flocculation of copper in wastewater by pulse-alternating current

Treatment of electroplating wastewater using electrocoagulation and integrated membrane

A Combined Microbial Desalination Cell and Electrodialysis System for Copper-Containing Wastewater Treatment and High-Salinity-water Desalination.

Studies on Treatment of Copper Pickling Wastewater with Electrode-Biomembrane Technique

Self-Enhanced Decomplexation of Cu-Organic Complexes and Cu Recovery from Wastewaters Using an Electrochemical Membrane Filtration System

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

Combined Reduction/Precipitation, Chemical Oxidation, and Biological Aerated Filter Processes for Treatment of Electroplating Wastewater

Electrocoagulation in a packed aluminium scraps anode reactor for mineral processing wastewater treatment

Monopole type and paralleled electro coagulation reactor for treating metallurgical wastewater-containing Zn~(2+) and Cd~(2+)

Synergistic promotion of microalgal growth and copper removal from synthetic wastewater by nanoscale zero-valent iron particles

Effective recycling of Cu from electroplating wastewater effluent via the combined Fenton oxidation and hydrometallurgy route