Abstract:Heavy metals in industrial wastewaters are typically present as stable metal–organic complexes with their cost-effective treatment remaining a significant challenge. Herein, a self-enhanced decomplexation scenario is developed using an electrochemical membrane filtration (EMF) system for efficient decomplexation and Cu recovery. Using Cu-EDTA as a model pollutant, the EMF system achieved 81.5% decomplexation of the Cu-EDTA complex and 72.4% recovery of Cu at a cell voltage of 3 V. The •OH produced at the anode first attacked Cu-EDTA to produce intermediate Cu-organic complexes that reacted catalytically with the H2O2 generated from the reduction of dissolved oxygen at the cathode to initiate chainlike self-enhanced decomplexation in the EMF system. The decomplexed Cu products were further reduced or precipitated at the cathodic membrane surface thereby achieving efficient Cu recovery. By scavenging H2O2 (excluding self-enhanced decomplexation), the rate of decomplexation decreased from 8.8 × 10–1 to 4.1 × 10–1 h–1, confirming the important role of self-enhanced decomplexation in this system. The energy efficiency of this system is 93.5 g kWh–1 for Cu-EDTA decomplexation and 15.0 g kWh–1 for Cu recovery, which is much higher than that reported in the previous literature (i.e., 7.5 g kWh–1 for decomplexation and 1.2 g kWh–1 for recovery). Our results highlight the potential of using EMF for the cost-effective treatment of industrial wastewaters containing heavy metals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05554</a>.Section S1: Assembly of the membrane module; Section S2: Setup of the EMF reactor; Section S3: Setup of the H-type two-compartment electrochemical cell; Section S4: Characterizations of the titanium mesh and conductive membrane; Section S5: Membrane properties of the conductive membrane; Section S6: Filtration test of the conductive membrane using real wastewater; Section S7: Evolution of H2O2 concentration during each experiment; Section S8: TMP evolution during the experiment; Section S9: Rate constants obtained in the two-compartment cell experiment; Section S10: Desorption results of each experiment; Section S11: Intermediates formed at different voltages; Section S12: Decomplexation experiments of each Cu-organic complex; Section S13: Evolution of the Cu(I) species concentration during each experiment; Section S14: Probability of decomplexation or reduction/precipitation of certain intermediates; Section S15: Cyclic voltammograms under an anodic scan; Section S16: Decomplexation and Cu recovery performance in the treatment of real wastewater; Section S17: mass transfer rate constant calculation; and Section S18: Energy efficiency and EE/O calculation (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05554/suppl_file/es0c05554_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Self-Enhanced Decomplexation of Cu-Organic Complexes and Cu Recovery from Wastewaters Using an Electrochemical Membrane Filtration System

Electrochemical treatment of wastewaters containing metal-organic complexes: A one-step approach for efficient metal complex decomposition and selective metal recovery

Efficient Cu Recovery from Wastewater Via Cu(III)-triggered Cu-organics Decomplexation Using Hierarchical Porous Carbon As Particle Electrode in a Three-Dimensional Electrochemical Reactor

Self-catalytic decomplexation of Cu−TEPA and simultaneous recovery of Cu by an electrochemical ozone production system using heterojunction Ni-Sb-SnO 2 anode

Cu (Ⅱ) removal using a composite functional membrane process coupling membrane separation and electrosorption

Contaminant Removal from Source Waters Using Cathodic Electrochemical Membrane Filtration: Mechanisms and Implications

High Energy-Efficiency Decomplexation of Metal-Complexes by H*-mediated Electro-Reduction on Hydroxyphenyl Co-porphyrin Catalysts

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

Simultaneous Solid-Liquid Separation and Wastewater Disinfection Using an Electrochemical Dynamic Membrane Filtration System.

Cu(Ⅱ)-EDTA Degradation and Copper Recovery from Wastewater in Wide Ph Ranges by an Electrooxidation-Capacitive Deionization System

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery.

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Complexation Electrodialysis As a General Method to Simultaneously Treat Wastewaters with Metal and Organic Matter

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

A New Combined Process for Efficient Removal of Cu(II) Organic Complexes from Wastewater: Fe(III) Displacement/uv Degradation/alkaline Precipitation

Cu-EDTA Decomplexation by UV/peracetic Acid Oxidation and Coupled Cu Recovery by Alkaline Precipitation: Efficiency and Mechanism

A New Idea for Efficient Copper Recovery from Wastewater by Electrodeposition: Adsorption Pretreatment

In-situ Enrichment and Removal of Cu(II) and Cd(II) from Low-Strength Wastewater by a Novel Microbial Metals Enrichment and Recovery Cell (MMERC)

Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis

In-situ Cu(II) Enrichment and Recovery from Low-Strength Copper-Laden Wastewater Using a Novel Electrically Enhanced Microbial Copper Recovery Cell (MCRC)

Self-catalytic Fenton-like reactions stimulated synergistic Cu-EDTA decomplexation and Cu recovery by glow plasma electrolysis