Abstract:Abstract A real industrial electroplating rinsing wastewater was collected and subjected to physical and chemical examination. The study showed that it can be categorized as high strength wastewater, at pH- 2, COD 1430 mg/l, and high level of metals above permissible limits, namely: 150, 30, 25, and 2.9 for Ni, Cu, Zn, and Fe mg/l respectively. Therefore, metals must be adequately removed before discharging to avoid any hazardous impact on the environment. Similar synthetic wastewater was prepared to study the effect of chemical coagulation for the precipitation of metals. The optimum removal rate was achieved by using a combination of lime and ferric chloride at 100 and 30 mg/l respectively. The chemically treated electroplating wastewater was subjected to an electrocoagulation study. A comparison between iron and stainless-steel electrodes for the removal of metals was investigated. Furthermore, the effect of different electric voltages, and contact time on metals removal efficiency were also examined. It was found that the optimum removal capacity was achieved when a stainless steel electrode was employed in the presence of ferric chloride as coagulant, at 10 volts, 30 min. contact time, and pH 9 for synthetic solution. In a batch treatment system, the real industrial wastewater was treated at the predetermined optimum operating conditions; the removal of metals was 92.1%, 87.8% and 82.9% for Ni. Zn, and Cu respectively. By employing a continuous flow reactor for the treatment of the same real wastewater and under the same operating conditions, metals removal rate increased to 98.9%, 97.4% and 96.6% for Ni. Zn, and Cu respectively. The level of metals in the final treated wastewater copes with Egyptian Environmental Regulation. The overall results confirmed that the electro-coagulation (EC) technology offers an effective alternative process in combination with the conventional chemical coagulation process for reaching high removal performance of toxic metals from the electroplating wastewater. The advantage of EC technique is achieving high treatment efficiency instead of expensive chemical reagents, high construction cost and/or other conventional processes. In addition, the final treated water can be reused for rinsing process in the electroplating industry and/or discharging without any environmental hazard effect. It is also recommended to employ solar energy instead of electricity to reduce cost of operation.

Monopole type and paralleled electro coagulation reactor for treating metallurgical wastewater-containing Zn~(2+) and Cd~(2+)

A Combined Electrocoagulation-Electrooxidation Treatment on Ctmp Wastewater

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Treatment of electroplating wastewater using electrocoagulation and integrated membrane

Treatment of Electroplating Wastewater by Electrocoagulation

Treatment of industrial electroplating wastewater for metals removal via electrocoagulation continous flow reactors

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

Combined Process of High-voltage Pulse Electrocoagulation and Refined Diatomite for Treatment of Electroplating Wastewater

Comparison of pH Adjustment and Electrocoagulation Processes on Treatability of Metal Plating Wastewater

Engineering Project of Electroplating Wastewater Toxic Pollutants Advanced Treatment Based on Resins Adsorption

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

Intensification of a new electrocoagulation system characterized by minimum energy consumption and maximum removal efficiency of heavy metals from simulated wastewater

Studies on Treatment of Copper Pickling Wastewater with Electrode-Biomembrane Technique

TREATMENT OF WASTEWATER FROM CYANIDE-FREE ZINC PLATING

Electroplating waste water treatment method

Treatment of Cathodic Electrocoating Wastewater by Coagulation and Ceramic Membrane Filtration

Investigation of plating wastewater treatment technology for chromium, nickel and copper

Highly efficient and energy-conserved flocculation of copper in wastewater by pulse-alternating current

Combined Electrochemical & Biological Treatment of Industrial Wastewater Using Porous Electrodes and a Packed Bed Aerator

Zn(II) Removal from Wastewater by Electrocoagulation/Flotation Method using New Configuration of a Split-Plate Airlift Electrochemical Reactor