Low-temperature Laser Processes for Synthesizing (100)-Textured Pb(Zr,Ti)O3 Thin Films on Si Substrate
Y.H. Chu,S.J. Lin,K.S. Liu,I.N. Lin
DOI: https://doi.org/10.1007/s00339-004-2947-9
2004-01-01
Applied Physics A
Abstract:High-performance Pb(Zr,Ti)O3, PZT, thin films were synthesized on Si substrates by using low-temperature laser-assisted processes, which combine pulsed laser deposition (PLD), laser lift-off (LLO) and laser-annealing (LA) processes. The PZT films were first grown on sapphire substrates at 400 °C, using Ba(Mg1/3Ta2/3)O3, BMT, as seeding layer, by the PLD process, and were then transferred to Si substrates at room temperature by a LLO transferring process. Utilization of the BMT layer is of critical importance in those processes, since it acted as a nucleation layer for the synthesis of the PZT thin films on the sapphire substrates and, at the same time, served as a sacrificial layer during laser irradiation in the LLO process. After the LLO process, the surfaces of the PZT films were recovered by the LA process for removing the damage induced by the LLO process. A thin BMT (∼30 nm) layer is randomly oriented, resulting in non-textured PZT films with good ferroelectric properties, viz. Pr=20.6 μC/cm2 and Ec=126 kV/cm, whereas a thick BMT (∼100 nm) layer is (100) preferentially oriented, leading to (100)-textured PZT films with markedly better ferroelectric properties, viz. Pr=34.4 μC/cm2 and Ec=360 kV/cm.