Abstract:Due to limitations in the billet dimension, the tensile anisotropy of billets processed by equal channel angular pressing (ECAP) are rarely reported. In this work, AZ91 magnesium alloy billets with a diameter of 60mm were processed by 4 ECAP passes via route A, Ba, Bc and C. The tensile test was carried out to study anisotropy and the tensile samples were machined along 3 orthogonal directions: extrusion direction (ED), transverse direction (TD) and normal direction (ND). The crystal preferred orientation was measured via X-ray diffraction (XRD). The results showed that significant tensile anisotropy occurred for different samples. The yield strength in the TD direction was highest regardless of the sample type. The 4Bc sample had a yield strength and fracture elongation that was similar in the ED and ND directions, which attributed to the 50.5° intersection angle between the (0001) basal plane and the observation plane. The texture for 4A and 4C samples could be both expressed as(0001)[4̅1̅50], while their pole densities were different. For the 4Ba samples, varieties of textures were formed whose pole densities were almost the same—this is responsible for the astonishing 8.9% fracture elongation in the ED direction. The basal texture dominated the tensile deformation mechanism at room temperature of the AZ91 magnesium alloy. The microstructure was greatly refined to 5µm by 4 passes ECAP from the above value of 100µm; the β phase was not homogenously distributed for 4Ba, 4Bc and 4C samples.

Uniformity and Continuity of Effective Strain in Az91d Processed by Multi-Pass Equal Channel Angular Extrusion

Influence of Equal Channel Angular Extrusion on the Properties of Mg-6Al Alloy

Deformation Behaviors of AZ31 Magnesium Alloy by Equal Channel Angular Extrusion

Mechanical Behavior of Processed AZ91D by Equal Channel Angular Extrusion during Semi-Solid Isothermal Compression

Simulation of AZ91D Processed by Equal Channel Angular Extrusion when Inner Corner Radius is not Zero

Numerical Simulation of Temperature Field of Az91d Magnesium Alloy During Equal Channel Angular Extrusion

The Microstructure and Mechanical Properties of AZ31 Mg Alloy Processed by Two-Step Equal Channel Angular Extrusion

Microstructure and mechanical properties of AZ31 Mg alloy processed by two-step equal channel angular extrusion

Effect of Route on Tensile Anisotropy in Equal Channel Angular Pressing

Enhancing Room Temperature Mechanical Properties of Mg–9Al–Zn Alloy by Multi-Pass Equal Channel Angular Extrusion

Effect of Solution Treatment on Microstructure Evolution and Mechanical Properties of Mg-6.0Zn-0.6Y-0.5Zr Alloy Processed by Equal Channel Angular Extrusion

The effect of texture on the mechanical properties of AZ31 MG alloy by equal channel angular extrusion

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

Mechanical Properties and Microstructure of AZ31 Mg Alloy Processed by Two-Step Equal Channel Angular Extrusion

Effect of ECAE Conditions on the Microstructure, Texture and Mechanical Properties of an Extruded Mg–Zn–Y–Zr Alloy

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Equal-Channel Angular Pressing of Magnesium Alloy Az91 and Its Effects on Microstructure and Mechanical Properties

Tensile anisotropy of AZ91 magnesium alloy by equal channel angular processing

An Electron Back-Scattered Diffraction Study on the Microstructure Evolution of AZ31 Mg Alloy During Equal Channel Angular Extrusion

Microstructure Evolution and Mechanical Properties of AZ 31 Mg Alloy Processed by Equal Channel Angular Extrusion

Influence of Inner Fillet Radius on Effective Strain Homogeneity in Equal Channel Angular Pressing