Abstract:A Cu-0.43Mg (wt.%) alloy was processed by equal channel angular pressing (ECAP) up to eight passes via a processing route (Bc). The hardness distribution on the longitudinal and transverse sections was collected and the microstructure in the central and bottom regions on the longitudinal section was examined. The result showed that the hardness was improved significantly at the initial stage of the ECAP process, and the lower hardness region appeared at the area nearby the bottom surface. With the number of ECAP passes, the hardness gently increased and finally became saturated. The inhomogeneity of the hardness distribution along the normal direction gradually weakened and finally disappeared. The shear microstructure in the central region was different from that in the bottom region after one ECAP pass, and they became similar to each other after two ECAP passes, except the rotation angle of the elongated grains. With the further increasing ECAP passes, there was no obvious microstructure difference between the central and bottom regions. The inhomogeneities of the hardness and the microstructure along the normal direction in the alloy after one ECAP passes should be attributed to the non-zero outer arc of curvature of the ECAP die and the friction between the bottom surface of the billets and the ECAP die walls. The yield strength of the alloy increased from 124 MPa before the ECAP process to 555 MPa after eight ECAP passes. The improvement of yield strengths of the ECAPed Cu-Mg alloy should be mainly attributed to the dislocation strengthening and the grain boundary strengthening.

Equal-Channel Angular Pressing of Magnesium Alloy Az91 and Its Effects on Microstructure and Mechanical Properties

Effect of Equal Channel Angular Pressing on Grain-refining Mechanism of Coarse-grained AZ31 Magnesium Alloy

Microstructure and Mechanical Properties of Equalchannel Angular Pressed AZ31 Magnesium Alloy

Hardness Homogeneity and Micro-Tensile Behavior in a Magnesium AZ31 Alloy Processed by Equal-Channel Angular Pressing

Microstructure and Mechanical Properties of AZ31 Mg Alloy Processed by Equal Channel Angular Pressing (ECAP)

Microstructure and Mechanical Properties of Ultrafine Grained Mg97Y2Zn1 Alloy Processed by Equal Channel Angular Pressing

Effects of Die Angle on Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing

Microstructure and Mechanical Properties of Mg96Y3Zn1 Alloy Processed by Equal Channel Angular Pressing

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Microstructure and Mechanical Properties of Za62 Mg Alloy by Equal-Channel Angular Pressing

Microstructure, Texture and Mechanical Properties of Mg-1.5mn-0.3ce Magnesium Alloy Reformed by Equal Channel Angular Pressing

Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing

Mechanical Properties and Microstructure of AZ31B Magnesium Alloy Processed by I-ECAP

Microstructure and Properties of AZ31 Magnesium Alloy with ECAP

Study of a Fine-Grained AZ31 Magnesium Alloy Prepared by Equal Channel Angular Pressing

Effect of Multi-Pass Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of a Heterogeneous Mg88Y8Zn4 Alloy

Improvement of Strength and Ductility of Mg-Zn-Ca-Mn Alloy by Equal Channel Angular Pressing

Experimental and Numerical Investigation on Pure Aluminum by ECAP

Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy During Equal Channel Angular Pressing

Structure and Mechanical Property of the Magnesium Alloy Prepared by the Equal-channel Angular Pressing via Different Processing Routes

Effect Of Equal Channel Angular Pressing On Microstructure And Mechanical Properties Of A Cu-Mg Alloy