Abstract:The reduction of the transition curvature of written bits in heat-assisted magnetic recording (HAMR) is expected to play an important role for the future areal density increase of hard disk drives. Recently a write head design with flipped write and return poles was proposed. In this design a large spatial field gradient of the write head was the key to significantly reduce the transition curvature. In this work we optimized the write pole of a heat-assisted magnetic recording head in order to produce large field gradients as well as large fields in the region of the heat pulse. This is done by topology optimization. The simulations are performed with dolfin-adjoint. For the maximum field gradients of $8.1\,$mT/nm, $8.6\,$mT/nm and $11.8\,$mT/nm, locally resolved footprints of an FePt like hard magnetic recording medium are computed with a coarse-grained Landau-Lifshitz-Bloch (LLB) model and the resulting transition curvature is analysed. Additional simulations with a bilayer structure with $50\%$ hard and $50\%$ soft magnetic material are computed. The results show that for both recording media, the optimized head design does not lead to any significant improvement of the written track. Thus, we analyse the transition curvature for the optimized write heads theoretically with an effective recording time window (ERTW) model. Moreover, we check how higher field gradients influence the curvature reduction. The results show that a simple optimization of the conventional head design design is not sufficient for effective curvature reduction. Instead, new head concepts will be needed to reduce transition curvature.

Design of a Head-Tape Interface for Ultra Low Flying

Tape Asperity Compliance Measurement Using A Pneumatic Method

Perspective of read heads for ultra-high recording densities and associated noise issues

Novel System Design for Readback at 10 Terabits Per Square Inch User Areal Density

System Design for Readback Above 1 Tbit/ From Granular Media

Calculation Of Dynamic Write Field For Perpendicular Recording Head

Write head design for effective curvature reduction in heat-assisted magnetic recording by topology optimization

Integrated Near Field Transducer Heat Assisted Magnetic Recording Head: Design And Recording Demonstration

Reader Design for Bit Patterned Media Recording at 10 Tb/in$^{2}$ Density

Dynamic Simulation of High-Density Perpendicular Recording Head and Media Combination

Efficiently reducing transition curvature in heat-assisted magnetic recording with state-of-the-art write heads

SURFACE MORPHOLOGY AND MICROTRIBOLOGICAL BEHAVIOR OF MAGNETIC VIDEO TAPES

Micromagnetic Specifications For Recording Self-Assembled Bit-Patterned Media

Impact of Media Design on Track Edge in Perpendicular Magnetic Recording

Two-bit Storage Recording Head Based on the Magnetic Thin Film Device

Demonstration And Characterization Of 130 Gb/In(2) Magnetic Recording Systems

A new read/write concept for vertical recording

Adjacent-track interference in ultrahigh-density perpendicular recording system

The Instability of Angstrom-Scale Head-Disk Interface Induced by Electrostatic Force

Experimental study of dual heater slider touchdown detectability

Reducing Head Magnetic Spacing of Magnetic Hard Disk and Its Limitations