Abstract:The second-generation high-temperature superconductor (HTS) tape is a promising material for the HTS application. However, the extremely large aspect ratio of the HTS coated tape leads to high power dissipation in the environment of a time-varying magnetic field. Reducing the width of HTS coated tape is a feasible way to decrease the alternating current (AC) loss of devices composed of HTS tapes. In this study, a numerical model of the HTS coil group composed of six sub-coils based on the T-A formulation is presented in which each HTS sub-coil is wound with original or narrow width Y-Ba-Cu-O (YBCO) tape. The 1/3 and 1/4 narrow width tapes are used to represent the tapes, which are divided into three and four equal parts, respectively. Then, we calculate the AC losses in 1/3 and 1/4 narrow width HTS coil groups in different cases. The estimated results of AC loss are compared with those of the HTS coil group wound by HTS tapes with original width. The numerical results show that AC transport losses of 1/3 and 1/4 narrow width HTS coil groups are smaller than that of the original HTS coil group for the applied high current. Furthermore, with the decrease in tape width, the reduction of AC loss becomes more significant. In contrast with the original width HTS coil group, the magnetization losses of the 1/3 and 1/4 narrow width HTS coil groups will decrease at the high magnetic field. In addition, the influences of harmonic components on AC loss are also considered.

Square Helmholtz coil with homogeneous field for magnetic measurement of longer HTS tapes

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Design for In-Field Critical Current Measurement System With 102 Mm 15 T Background Magnet

Optimized and Standardized Circular-Coil Systems for Homogeneous Magnetic Field Generation

Improved Square-Coil Configurations for Homogeneous Magnetic Field Generation

A Method for Continuous Measurement of Critical Current of HTS Tapes Using Magnetic Circuits

Design of Superconducting Magnet for Background Magnetic Field

Shim Coil Design For Halbach Magnet By Equivalent Magnetic Dipole Method

Electromagnetic Design Of Hts Insert For Ultrahigh Field Nmr Magnet

Use of Bi-2223 Multifilamentary Tapes As RF Coils for 1.5 T MRI Application

Experimental Research on Critical Current Behavior of Various Commercial HTS Tapes

Method and Apparatus for Continuous Examination of HTS Tape Using Magnetic Circuit

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Designs and Tests of Shaking Coils to Reduce Screening Currents Induced in HTS Insert Coils for NMR Magnet

23 Tesla high temperature superconducting pocket magnet

Experimental study on I c anisotropy of 2nd generation HTS tape

MethodandApparatusforContinuous Examination of HTS Tape Using Magnetic Circuit Chen Gu, Timing Qu, Shengnan Zou, and Zhenghe Han

Computation of AC Loss of HTS Coils Wound by Coated Conductors with Different Widths

Research on Homogeneous Magnetic Field Source of Cube Four-Turn Coil

The Conceptual Design of Hybrid High Temperature Superconducting Magnet