Abstract:Reduction of head-media spacing (HMS) keeps crucial during the increase of areal density of hard disk drives (HDD). The design of hard disk drive with a superlubric interface is reported with two schemes for HDI design to realize superlubricity. For the first scheme, the DLC layer is kept on the disk while removing the lubricant layer. The DLC layer on the transducer is replaced by graphene-like layer. The direct contact between head and disk could reduce the HMS to about 2.3 nm. For the second scheme, the DLC layer on disk is further replaced by graphene and the HMS could be reduced to below 1 nm. For the first scheme, the basic proof of concept experiments are conducted using micro-scale graphite island samples. Ultralow COF, with the average of 0.0344 on the interface of single crystalline graphite surface and DLC substrate is demonstrated by AFM. What's more, the temperature dependence of friction between single crystalline graphite and DLC is measured by micro-force sensor mounted on micro-manipulator. The results show that heating helps to significantly decrease the friction. Desorption of contaminants along the interface is speculated to be the key mechanism for temperature dependence of friction. This work provides the concept of large-scale superlubricity relevant in HDD applications, which could be a promising technology to ultimately reduce HMS for future HDI development.

Reducing Head Magnetic Spacing of Magnetic Hard Disk and Its Limitations

A flyability and durability dilemma in hard disk drives

MoA-2-5 is No Lube Disk Possible?

Magnetic Film Thickness Effects on the Recording Performance of Perpendicular Media

Continuous Ultra-Thin Carbon Nitride Thin Film for Magnetic Hard Disk Via Post Nitrogen Plasma Treatment

TuA-2-4 EFFECTS OF ADDITIVES AND DEEP UV IRRADIATION ON MAGNETIC HARD DISK TO WEAR ON MAGNETIC HEAD

Ultraviolet Irradiation of Lubricant and Additives Thin Films to Reduce Wear to the Magnetic Head

Influence of the rarefied effect on gas lubrication performances in the hard disk drive

New Paradigms in Magnetic Recording

Microtribology of Hard Disk Drive for High Density Recording

Medium noise and error rate in ultrahigh density computer hard disk systems

Flyability and Durability Test of Dynamic Fly-Height Sliders at 1-Nm Clearance

Study on the Cyclotriphosphazene Film on Magnetic Head Surface

Contact type read-write hard disk with multiple magnetic heads arranged side by side

Calculation Of Dynamic Write Field For Perpendicular Recording Head

Influence of Van Der Waals Force on the Ultra-thin Gas Lubrication of Magnetic Head/Disk

From Perpendicular Magnetic Recording to Heat Assisted Magnetic Recording

Superlubricity relevant in hard disk drive applications

Heat Assisted Magnetic Recording with Matching Media and Recording Head Field

Performances of Lubricants in Hard Disk and Their Influences on Dynamic Characteristics of Magnetic Recording System

Seeking Ways to Reduce the Coercivity of Fe-N Soft Magnetic Films