Abstract:The probe-based seek-and-scan data storage system is an ideal candidate for future ultrahigh-density (> 1 Tbit/ inch2) nonvolatile memory devices (Vettiger et al., 2002; Pantazi et al., 2008; Hamann et al., 2006; Ahn et al., 1997; Cho et al., 2003; Cho et al., 2005; Ahn et al., 2004; Cho et al., 2006; Heck et al., 2010). In such a system, an atomic force microscope (AFM) probe (or an array of AFM probes) is used to write and read data on a nonvolatile medium; the bit size depends mainly on the radius of the probe tip. Moreover, the storage area is not defined by lithography like in SSDs, but rather by the movement of the probes. Thus improving the probe motion control to the tenth of a distance can translate into two orders of magnitude higher density. Bit size as small as 5 nm and a storage density in the Tbit/ in2 regime with data rate comparable to flash technology have been achieved (Cho et al., 2005; Cho et al., 2006). Unlike SSD technology which requires new lithographic and fabrication tools for each new generation, manufacturing of the probe-based device can be achieved using existing low-cost semiconductor equipment, which can reduce the price of these devices considerably. Another advantage of probe-based memory is that the mechanism to move the probes is low power, which reduces power consumption and heat dissipation in comparison to HDD devices. While various writing mechanisms have been proposed for probe-based storage, e.g., thermomechanical and thermal writings on polymeric and phase-change media (Vettiger et al., 2002; Pantazi et al., 2008; Hamann et al., 2006), a great deal of attention has recently been devoted to the electrical pulse writing on ferroelectric films due to the non-structuredestructive nature of the write-erase mechanism (Ahn et al., 1997; Cho et al., 2003; Cho et al., 2005; Ahn et al., 2004; Cho et al., 2006; Heck et al., 2010). When a short electrical pulse is applied through a conductive probe on a ferroelectric film, the highly concentrated electric field can invert the polarization of a local film volume, resulting in a nonvolatile ferroelectric domain that is the basis of data recording. This mechanism allows for longer medium lifetime, i.e., larger number of write-erase cycles that is comparable to hard disk drives, faster write and read times (Forrester et al., 2009), smaller bit size (Cho et al. (2006) and higher storage densities (Cho et al. (2006). Although the probe-based storage technology based on ferroelectric media has shown great promise, no commercial product has yet reached the market. This is mainly due to

Two-bit Storage Recording Head Based on the Magnetic Thin Film Device

L-Shaped Electrode Design For High-Density Spin-Orbit Torque Magnetic Random Access Memory With Perpendicular Shape Anisotropy

Magnetic Film Thickness Effects on the Recording Performance of Perpendicular Media

Integrated Near Field Transducer Heat Assisted Magnetic Recording Head: Design And Recording Demonstration

Heat-assisted Magnetic Recording by a Near-Field Transducer with Efficient Optical Energy Transfer

Prototype Design of a Domain-Wall-Based Magnetic Memory Using a Single Layer La0.67Sr0.33MnO3 Thin Film.

Dynamic Simulation of High-Density Perpendicular Recording Head and Media Combination

Ultrahigh Density Probe-Based Storage Using Ferroelectric Thin Films

Tunneling magnetoresistive heads for magnetic data storage

Three-Dimensional Magnetic Page Memory

A Magnetoelectric Memory Cell With Coercivity State As Writing Data Bit

Micromagnetic Simulation of FeCo Write Head in Perpendicular Recording Hard Disk Drives

Stable ultrahigh-density magneto-optical recordings using introduced linear defects

Novel aluminum near field transducer and highly integrated micro-nano-optics design for heat-assisted ultra-high-density magnetic recording

Heat-Assisted Magnetic Recording’s Extensibility to High Linear and Areal Density

Micromagnetic Studies Of Recording Process In Patterned Magnetic Media

Reading and Writing Single-Atom Magnets

Perspective on nanoscale magnetic sensors using giant anomalous Hall effect in topological magnetic materials for read head application in magnetic recording

Demonstration of Magnetoelectric Read Head of Multiferroic Heterostructures

Fundamental limits in heat assisted magnetic recording and methods to overcome it with exchange spring structures