Sintering and microwave dielectric properties of LTCC-zinc titanate multilayers

Q.L. Zhang,H. Yang,J.L. Zou,H.P. Wang
DOI: https://doi.org/10.1016/j.matlet.2004.11.036
IF: 3
2005-01-01
Materials Letters
Abstract:The effects of ZnO–B2O3–SiO2 (ZBS) on the sintering behavior and microwave dielectric properties of ZnO–TiO2 system were investigated as a function of ZBS content and sintering temperature. Densities of the specimens were enhanced with an increase of ZBS up to 2 wt.% and then decreased. X-ray diffractometry analyses results indicated that the phase stability region of the hexagonal ZnTiO3 extended to lower temperatures as the amount of ZBS increased. The dielectric properties of ZnO–TiO2 system with ZBS are strongly dependent on the sintering conditions, especially near the phase decomposition temperature. The sintering temperature of the specimens could be reduced to 900 °C without the degradation of the microwave dielectric properties. From 900 °C, the temperature compensation characteristics occurred as the phase composition changed from ZnTiO3 to two phases: Zn2TiO4 and rutile. The dielectric constant (ɛr) increased and Q×f value decreased due to the phase decomposition. The ɛr value of 27, Q×f value of 19,396 (at 6 GHz) and τf value of 2 ppm/°C were obtained for ZnO–TiO2 ceramics with 2.0 wt.% ZBS sintered at 900 °C for 3 h. The low-temperature sintering ceramics powders were suitable for the tape casting process. Also, the material is compatible with Ag electrodes and, therefore, is suitable for LTCC application.
What problem does this paper attempt to address?