Abstract:We have fabricated carbon nanotube and MoS2 field-effect transistors with asymmetric contact forms of source-drain electrodes, from which we found the current directionality of the devices and different contact resistances under the two current directions. By designing various structures, we can conclude that the asymmetric electrical performance was caused by the difference in the effective Schottky barrier height (ΦSB) caused by the different contact forms. A detailed temperature-dependent study was used to extract and compare the ΦSB for both contact forms of CNT and MoS2 devices; we found that the ΦSB for the metal-on-semiconductor form was much lower than that of the semiconductor-on-metal form and is suitable for all p-type, n-type, or ambipolar semiconductors. This conclusion is meaningful with respect to the design and application of nanomaterial electronic devices. Additionally, using the difference in barrier height caused by the contact forms, we have also proposed and fabricated Schottky barrier diodes with a current ratio up to 104; rectifying circuits consisting of these diodes were able to work in a wide frequency range. This design avoided the use of complex chemical doping or heterojunction methods to achieve fundamental diodes that are relatively simple and use only a single material; these may be suitable for future application in nanoelectronic radio frequency or integrated circuits.

Carbon Nanotube Field Effect Transistors Based on Schottky Contact

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Study on the Field-Effect Transistor Based on Pd/SWNT/Al Configuration

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Unipolar P-Type Single-Walled Carbon Nanotube Field-Effect Transistors Using TTF–TCNQ As the Contact Material

Nanotube and Nanowire Transistors

Hf-Contacted High-Performance Air-Stable N-Type Carbon Nanotube Transistors

High performance n-type carbon nanotube field-effect transistors with chemically doped contacts

Carbon-Nanotube-Based Single-Electron/Hole Transistors

Ballistic carbon nanotube field-effect transistors

Carbon nanotube field-effect transistors with integrated ohmic contacts and high-κ gate dielectrics

Field-Effect Transistors Based on Single-Wall Carbon Nanotubes Bundles

Transformation of unipolar single-walled carbon nanotube field effect transistors to ambipolar induced by polystyrene nanosphere assembly.

N-Type Field-Effect Transistors Made of an Individual Nitrogen-Doped Multiwalled Carbon Nanotube.

Influence of Asymmetric Contact Form on Contact Resistance and Schottky Barrier, and Corresponding Applications of Diode

Enhanced Performance of Short-Channel Carbon Nanotube Field-Effect Transistors Due to Gate-Modulated Electrical Contacts

Carbon Nanotubes as Schottky Barrier Transistors

High performance field effect transistors made of a multiwall nanotube intramolecular junction

Carbon Nanotube Electronics: Recent Advances

Field-effect Transistors with Multiple Channels Constructed by Carbon Nanotubes

Carbon Nanotube Multi-Channeled Field-Effect Transistors.