Abstract:In this paper, the design, fabrication, and characterization of a robust MEMS thermal wind sensor utilizing ceramic film packaging are proposed. The ceramic film is fabricated by means of low temperature co-fired ceramic (LTCC) technology, achieving the excellent adhesion between silicon substrate and ceramic film without any thermal adhesive. The most important is that the adverse effects of the packaging on the performance of the thermal wind sensor can be minimized by adjusting the thickness and thermal conductivity of the ceramic film during the preparation of the ceramic slurry. The influences of thickness and thermal conductivity of ceramic film on the performance of sensor have been simulated by finite element method, and the results are in reasonable agreement with theoretical analysis. The proposed sensors were tested and calibrated in a wind tunnel. Experiments results demonstrate that the sensitivity of the proposed sensor is decreased only 4.7%, compared with the sensor without ceramic film. The maximum measurement error of the proposed sensor in wind speed and direction is 0.66 m/s and 5°, respectively. Compared with the sensor packaged with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$250\mu \text{m}$ </tex-math></inline-formula> ceramic carrier, the heating power of the proposed sensor is reduced by nearly 50% and the sensitivity is increased by an order of magnitude at the same time.

Flip-Chip Packaging for a Two-Dimensional Thermal Flow Sensor Using a Copper Pillar Bump Technology

A Flip-Chip Packaged CMOS Thermal Flow Sensor

A Self-Packaged Thermal Flow Sensor by CMOS MEMS Technology

Flip-Chip on Board Packaging of A Thermal Wind Sensor

Direct Chip Attachment Packaging of a 2-D Thermal Flow Sensor

Direct chip attachment packaging of 2D thermal flow sensor

A Flip Chip Package for Thermal Mass Flowmeter

Silicon Thermal Flow Sensor Based On Ceramic Substrate

Novel Cmos Two-Dimensional Integrated Gas Flow Sensor

A Self-Packaged Two-Dimensional Thermal Wind Sensor Based on Thermopiles for Low Cost Applications

Design and Test of a Two-dimensional Integrated Flow Sensor by CMOS Technology

Development of A Self-Packaged 2d Mems Thermal Wind Sensor for Low Power Applications

CMOS thermal wind sensor and its package

Ceramic Film Packaging for 2-D Thermal Wind Sensor Using LTCC Technology

Wafer Level Packaging Based on AU-AU Bonding for a CMOS Compatible Thermal Wind Sensor

A Two-Dimensional Flow Sensor Using Integrated Silicon Spreading-Resistance Temperature Detectors

Systematic Study of Packaging Designs on the Performance of CMOS Thermoresistive Micro Calorimetric Flow Sensors

Ceramic Thermal Wind Sensor Based on Advanced Direct Chip Attaching Package

An Integrated Circuit Compatible Compact Package for Thermal Gas Flowmeters

High Performance Bidirectional Thermal Gas Flow Sensor of (100) Silicon Single-Sided Fabrication by 45-Tilted Dicing

A FCOB packaged thermal wind sensor with compensation