Abstract:The peak luminosity of the super Tau-Charm facility (STCF) proposed by the Chinese particle physics community is about an order of magnitude greater than the present Tau-Charm factory. In the STCF, the micro-pattern gas detector (MPGD)-based Ring Imaging CHerenkov (RICH) detector used for Particle IDentification (PID) demands a new high integration, low dead time, and high-performance application-specific integrated circuit (ASIC). In this article, the design and testing of a 32-channel mixed-signal readout ASIC prototype is presented. Each channel consists of a charge-sensitive amplifier (CSA)-based analog signal processing circuit, a valid signal discriminator, a switched capacitor array (SCA), a 10-bit Wilkinson ADC, and a digital core. The ASIC provides charge measurement ranges from 48 fC to 10 pC with automatic calibration, five programmable peaking times from 70 ns to , and can be operated at a sampling frequency of up to 240 MHz. The ASIC has been fabricated in a CMOS technology and all the test results meet the requirements. In the case of an input capacitance of 20 pF and a charge collection time of 100 ns, the charge resolution of the full-scale signal is better than 0.38% and the time resolution of the 1/3-scale signals is better than 0.78 ns for all charge measurement range options, while the power consumption is less than 20 mW per channel. In particular, the equivalent noise charge (ENC) is 627 e + 18.8 e/pF for the 48 fC charge measurement range. Besides, the maximum repetition event rate capability per channel is up to 125 kHz.

Two-stage charge sensitive amplifier with self-biased MOS transistor as continuous reset system.

Radiation detector readout circuit with two-stage charge sensitive amplifier

A Versatile 16-Channel Front-End Integrated Circuit for Semiconductor Radiation Detectors

Multi-channel Weak Current Acquisition System for X-ray Sensor

A 2.1/5.2-NEF/PEF Capacitively Coupled Instrumentation Amplifier with Fast - Settling for Biosensor

Design of a Sample-and-Hold Circuit for High Speed CMOS Image Sensor

A Low Noise Fully-Integrated Readout Electronic with Pile-Up Rejector for Particle Detector.

A Fully Integrated CMOS Readout Circuit for Particle Detectors

Design and Experimental Validation of an Integrated Multichannel Charge Amplifier for Solid-State Detectors With Innovative Spectroscopic Range Booster

Particle Detector Readout Integrated Circuit of 0.18 Mu M Technology with 164 E Equivalent Noise Charge

A low noise charge sensitive amplifier with adjustable leakage compensation in 0.18µm CMOS process

A Mixed-Signal Micromegas Readout ASIC Prototype With Automatic Charge Measurement Range Calibration

Design and performance of a low-noise, low-power consumption CMOS charge amplifier for capacitive detectors

A Novel Integrated Circuit for Semiconductor Radiation Detectors with Sparse Readout

The design of 1MCPS CMOS analog front-end circuit for radiation detector

A Multi-Channel Front-End ASIC for Pixellated Detectors

A Front-End ASIC for Semiconductor Radiation Detectors with Pile-up Rejection Capability

Design of Low Noise CMOS Charge Sensitive Amplifier ASIC

A phase-shift compensation technique for radiation detection readout circuit to improve stability

Particle Detector Readout Integrated Circuit of 0.18μm Technology with 164 E Equivalent Noise Charge

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits