Abstract:Cadmium zinc telluride (CdZnTe, CZT) radiation detectors are suitable for a variety of applications, due to their high spatial resolution and spectroscopic energy performance at room temperature. However, state-of-the-art detector systems require high-performance readout electronics. Though an application-specific integrated circuit (ASIC) is an adequate solution for the readout, requirements of high dynamic range and high throughput are not available in any commercial circuit. Consequently, the present study develops the analog front-end electronics with operational amplifiers for an 8x8 pixelated CZT detector. For this purpose, we modeled an electrical equivalent circuit of the CZT detector with the associated charge-sensitive amplifier (CSA). Based on a detailed network analysis, the circuit design is completed by numerical values for various features such as ballistic deficit, charge-to-voltage gain, rise time, and noise level. A verification of the performance is carried out by synthetic detector signals and a pixel detector. The experimental results with the pixel detector assembly and a 22Na radioactive source emphasize the depth dependence of the measured energy. After pulse processing with depth correction based on the fit of the weighting potential, the energy resolution is 2.2% (FWHM) for the 511 keV photopeak.

Radiation detector readout circuit with two-stage charge sensitive amplifier

Two-stage charge sensitive amplifier with self-biased MOS transistor as continuous reset system.

A Versatile 16-Channel Front-End Integrated Circuit for Semiconductor Radiation Detectors

A Fully Integrated CMOS Readout Circuit for Particle Detectors

A Novel Integrated Circuit for Semiconductor Radiation Detectors with Sparse Readout

A Low Noise Fully-Integrated Readout Electronic with Pile-Up Rejector for Particle Detector.

An Integrated Readout Circuit for Personal Dosimetry with Phase-Shift Compensation Technique to Improve Stability.

Design and Experimental Validation of an Integrated Multichannel Charge Amplifier for Solid-State Detectors With Innovative Spectroscopic Range Booster

A Radiation Detection Readout Circuit with Current Feedback Baseline Holder

The design of 1MCPS CMOS analog front-end circuit for radiation detector

Design of a Preamplifier for Silicon Detector Redout Experiment

Low-noise CMOS Charge-Sensitive Preamplifier

Particle Detector Readout Integrated Circuit of 0.18 Mu M Technology with 164 E Equivalent Noise Charge

Radiation Detector Front-End Readout Chip with Nonbinary Successive Approximation Register Analog-to-Digital Converter for Wearable Healthcare Monitoring Applications

Particle Detector Readout Integrated Circuit of 0.18μm Technology with 164 E Equivalent Noise Charge

Front End Electronics for Radiation Detectors Based on SiC: Application to High Dose per Pulse Charged Particle Beam Current Measurement

Design and Test Results of a Front-End ASIC for Radiation Detectors

Design and Test Results of A Low-Noise Readout Integrated Circuit for High-Energy Particle Detectors

Design and performance of a low-noise, low-power consumption CMOS charge amplifier for capacitive detectors

A phase-shift compensation technique for radiation detection readout circuit to improve stability

Charge-sensitive front-end electronics with operational amplifiers for CdZnTe detectors