Abstract:High efficiency heat transfer tubes play a major role in industrial applications due to its benefits in recovering more energy, smaller footprint and lower operational costs. Given the importance of enhanced heat transfer tubes, an experimental investigation was carried out to compare the performance of the Vipertex 1EHT tube with an equivalent smooth tube using Particle Image Velocimetry (PIV). For the experimental setup a Dantec Dynamics PIV system was considered, and both tubes used had an outer diameter of 19.05 mm and inner diameter of 17.09 mm. Heat transfer experiments were conducted at 100% of the heater power capacity, i.e. 750 W, and observations were made in terms of boiling visualization, particle velocity vector field, and seeding particle velocity. The results obtained from the visualization showed higher density of bubble formation on the surface of 1EHT tube compared to the smooth tube, as well as a more frequent formation of bubbles. Moreover, the high-speed camera films recorded for comparison between smooth and enhanced tubes, showed that the dimples provided nucleation sites. Additionally, the average particle velocity for the 1EHT tube was 0.300 m.s(-1) and for the smooth tube it was only 0.230 m.s(-1), as a result of the higher heat transfer of the enhanced tube. These results suggest that the 1EHT tube performs better in boiling heat transfer application, which can be attributed to the enhanced heat transfer area produced by the series of dimples/protrusions and petals distributed over its surface.

Visualization of longitudinal vortex flow in an enhanced heat transfer tube

FLOW VISUALIZATION OF THE LONGITUDINAL VORTICES IN THE DISCRETE DOUBLE INCLINED RIBS TUBE

Turbulent flow and heat transfer in discrete double inclined ribs tube

Tubes with Heat Transfer Property Intensified by Multi-longitudinal Vortices According to the Field Coordination Theory

THE OUTSIDE TUBE HEAT TRANSFER PERFORMANCE OF THE DISCRETE DOUBLE INCLINED RIBS TUBE

Field Synergy Optimization and Enhanced Heat Transfer by Multi-Longitudinal Vortexes Flow in Tube

Experimental and Numerical Flow Visualizations of Mixed Convection with Flow Reversal in a Horizontal Channel with Constant Wall Temperature

Experimental investigation of the flow characteristics within a vortex tube with different configurations

Investigation on the Flow and Heat Transfer Characteristics in a Multi-Pass Channel Using Magnetic Resonance Velocimetry and Transient Thermochromic Liquid Crystal

Experimental Study of Flow Structure Characteristics for a T-Junction Duct with Horizontal Vanes

Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-shaped Ribs and Dimples

Direct numerical simulation of turbulent duct flow with inclined or V-shaped ribs mounted on one wall

Viscous Heating for Laminar Liquid Flow in Microtubes

Visualization experiment and thermal-hydraulic behaviour of assembled self-rotating twisted tape in double-pipe heat exchangers

EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE HEAT TRANSFER ENHANCEMENT USING LONGITUDINAL VORTICES IN NARROW-CHANNELS

Visualization of Heat Transfer Characteristics of 1EHT and Smooth Surface Tubes

Investigation on the Flow and Heat Transfer Characteristics in a Multi-Pass Channel Using MRV and Transient TLC

Visualization of R410A Flowing in Copper and Stainless Steel Dimpled Tubes Enhanced by Petal-Shaped Patterns under Evaporation Conditions

Reynolds Number Effect on Vortex Ring Colliding with a Solid Wall

Numerical Study of Heat Transfer and Fluid Flow in Rectangular Narrow Channel with Periodically Mounted Longitudinal Vortex Generators

Heat Transfer Enhancement in Rectangular Narrow Channel with Periodically Mounted Longitudinal Vortex Generators on One Sidewall