Abstract:A heat exchanger is a device that transfers unneeded heat from one region to another, and transferred heat may be fully reused, thus improving energy efficiency. To augment this positive process, many studies and investigations on automation technologies have been performed. Inserts are widely used in pipe flow for heat transfer enhancement, since they can break the boundary layer and promote the heat exchange. Segmented twisted tape, which is applicable in 3D printing, is a novel insert and has potential in heat transfer enhancement. To clarify its advantages and disadvantages, this research presents a numerical investigation of vortex flow and heat enhancement in pipes containing one segmented twisted element. Flow state and heat transfer behaviour are obtained by simulation under constant wall temperature with different Reynolds numbers, ranging from 10,000 to 35,000. The effects of geometric parameters, including twist ratio (P/D = 2.0, 3.3 and 4.6) and length ratio (L/P = 0.3, 0.5 and 0.7), on the Nusselt number (Nu) and friction factor (f) are investigated. Streamline and temperature distribution are presented. Meanwhile, local and overall heat transfer performance is compared with those of a smooth tube, and the overall performance is evaluated by performance evaluation factor (η). The results indicate that the twist ratio (P/D) plays a dominant role in heat transfer enhancement while the length ratio (L/P) also has considerable influence. It is shown that a segmented tape insert can increase the overall heat transfer rate by 23.5% and the friction factor by 235%, while local improvement along the tube can be 2.8 times more than the plain tube.

THE OUTSIDE TUBE HEAT TRANSFER PERFORMANCE OF THE DISCRETE DOUBLE INCLINED RIBS TUBE

Turbulent flow and heat transfer in discrete double inclined ribs tube

Tubes with Heat Transfer Property Intensified by Multi-longitudinal Vortices According to the Field Coordination Theory

A Numerical Study On Fluid Flow And Heat Transfer Performance Of Internally Roughened Tubes With Dimples

Boiling Heat Transfer of R22 Outside Single Horizontal Doubly-Enhanced Tubes

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Two-phase heat transfer of R410A in annuli outside enhanced tubes with micro-fin and dimple

Numerical study of air-side performance of a finned flat tube heat exchanger with crossed discrete double inclined ribs

EFFECT OF GEOMETRICAL PARAMETERS ON THE THERMAL-HYDRAULIC PERFORMANCE OF INTERNAL HELICALLY RIBBED TUBES

Forced Convection Heat Transfer Outside Enhanced Tubes with Different Surface Structures

Turbulent flow and heat transfer in a new type of internally torsion-ribbed helical tube

Investigating Enhanced Convection Heat Transfer in 3D Micro-Ribbed Tubes Using Inverse Problem Techniques

Experimental and Numerical Investigation on Heat Transfer of Therminol Heat Transfer Fluid in an Internally Four-Head Ribbed Tube

Heat transfer and hydrodynamics analysis of a novel dimpled tube

Numerical Study of Thermal-Hydraulic Performance Improvement of Enhanced Surface Tubes

Experimental and numerical investigation on the flow and heat transfer characteristics of the tube with an integrated internal longitudinal fin

Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow

Boiling Heat Transfer of R134a Outside Horizontal Doubly-Enhanced Tubes

Numerical simulation of dimled tubes for heat transfer enhancement

Field Synergy Optimization and Enhanced Heat Transfer by Multi-Longitudinal Vortexes Flow in Tube

Numerical–Theoretical Analysis of Heat Transfer, Pressure Drop, and Fouling in Internal Helically Ribbed Tubes of Different Geometries